|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
|
|||
|
|||
|
help me... slove this problem
i have a 91 240sx and when i am going fast around 80mph.. and i tend to brake the car tend to shake... and back wheel tend to wiggle.... does that mean my rotor is mess up? our is it my wheel unbalance??? please help....
|
|
#2
|
|||
|
|||
|
if your wheel was unbalanced you would only feel it at a certain speed. like say around 60mph it shook and then after acceling faster it goes away. if it just does it at higher speeds most likely it is your rotors.
__________________
in construction: s14 sr20det in my 91' coupe se |
|
#3
|
|||
|
|||
|
Re: help me... slove this problem
bad tie rods can also cause/amplify the shaking
__________________
looking for a 95+ 240sx in/near D F Dub area |
|
#4
|
|||
|
|||
|
yeah forgot about that. it could be ball joins bent arm and such. just look over everything
__________________
in construction: s14 sr20det in my 91' coupe se |
|
#5
|
|||
|
|||
|
Re: help me... slove this problem
If its only when your braking, its probably just warped rotors.
__________________
-Cory 1992 Nissan 240sx KA24DE-Turbo: The Showcar Stock internals. Daily driven. 12.6@122mph 496whp/436wtq at 25psi |
|
#6
|
||||
|
||||
|
Re: help me... slove this problem
definitely... i had the same problem. i replaced the rotors and got the wheels balanced. The problem quickly went away.
Also if you check all of your bushings you may come across a few that need replacing... like everyone said look around and see what the prob is. |
|
#7
|
||||
|
||||
|
Re: help me... slove this problem
Quote:
Is it just me or does this look like one of those crappy Japenese translations like on the JUN site? "This bumper is made air space at the front bumper bigger than normal. It improves the cooling efficiency of the intercooler and radiator. It is considering for after parts (oil cooler,brake duct). It has the duct of both sides big, and adds an air duct to both sides. It contributes to the stability in high-speed-running because optimal down force is gotten by large-size rip spoiler. *It uses normal winker. " -JUN AUTO S13 Front Bumper
|
|
#8
|
||||
|
||||
|
Re: help me... slove this problem
rotors for sure, check em
__________________
Hand breaking is the easiest~
|
|
#9
|
|||
|
|||
|
Re: help me... slove this problem
uhhh...shaks when breaking.. dz it shit to one side or just shake.... if it shifts and shaks then its the frame (mine was dented and its shifted and shook when breking) if not then its the rotors....change them!!
__________________
"A good driver is measured not by his lap times, but by the amount of time he spend trying to make sense of his car" E.K. |
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|