-
Go Back   Automotive Forums Car Chat > Ford > Taurus | Taurus Wagon
Register FAQ Community
Reply Show Printable Version Show Printable Version | Subscription Subscribe to this Thread
 
Thread Tools
  #1  
Old 12-10-2004, 04:25 PM
hughw hughw is offline
AF Regular
 
Join Date: Oct 2004
Posts: 138
Thanks: 0
Thanked 0 Times in 0 Posts
Windshield Washer pressure problem

On my 2000 SES , the driver side windshield washer nosel sprays barely to the bottom of the windshield...and the passenger side sprays about 1/4 the way from the bottom....Has anyone had experance with this problem....Is the pump shot?....is the hose stopped up or do the nosels get stopped up enough to cause this problem.?...Any Fixes ?
Reply With Quote
  #2  
Old 12-10-2004, 04:48 PM
1bubba4 1bubba4 is offline
AF Newbie
 
Join Date: Dec 2004
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Re: Windshield Washer pressure problem

i have a 98 taurus and the head lights stay on where is the module and will unplugging it fix the problem
Reply With Quote
  #3  
Old 12-10-2004, 06:56 PM
hughw hughw is offline
AF Regular
Thread starter
 
Join Date: Oct 2004
Posts: 138
Thanks: 0
Thanked 0 Times in 0 Posts
Re: Re: Windshield Washer pressure problem

Quote:
Originally Posted by 1bubba4
i have a 98 taurus and the head lights stay on where is the module and will unplugging it fix the problem

Your statement appears within my thread...you must have had mine pulled up and entered your problem as a reply to my thread...To get more attention to your problem and your own heading..punch "New Thread" and re enter your information
Reply With Quote
  #4  
Old 12-11-2004, 08:00 AM
Cajunblu Cajunblu is offline
AF Newbie
 
Join Date: Mar 2004
Posts: 36
Thanks: 0
Thanked 0 Times in 0 Posts
hughw;

Sometimes they do get clogged up, take a paper clip to the holes.
Also I believe it is a small metal tube (Where the fluid comes out) being careful you can bend it up to spray more of your windshield.

Hope this helps...Robert
Reply With Quote
  #5  
Old 12-14-2004, 06:55 AM
stevelew stevelew is offline
AF Newbie
 
Join Date: Oct 2004
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
Your windshield pump is probably clogged with dirt or old windshield washer fluid. The pump is located at the bottom of the tank and once you remove the tank it's real easy to clean all the hoses and pump at the same time. To remove the tank you need to jack up the passenger side front wheel which will give you access to the tank. Remove plastic cover protecting the wheel well. Remove the screws holding the tank in place. The tank should drop out. Clean the tank, pump, blow out the lines and you should be in good shape. Takes a couple of hours.

Good luck and maybe a Chilton book would help.
Reply With Quote
  #6  
Old 12-14-2004, 10:21 PM
hughw hughw is offline
AF Regular
Thread starter
 
Join Date: Oct 2004
Posts: 138
Thanks: 0
Thanked 0 Times in 0 Posts
Re: Windshield Washer pressure problem

Quote:
Originally Posted by stevelew
Your windshield pump is probably clogged with dirt or old windshield washer fluid. The pump is located at the bottom of the tank and once you remove the tank it's real easy to clean all the hoses and pump at the same time. To remove the tank you need to jack up the passenger side front wheel which will give you access to the tank. Remove plastic cover protecting the wheel well. Remove the screws holding the tank in place. The tank should drop out. Clean the tank, pump, blow out the lines and you should be in good shape. Takes a couple of hours.

Good luck and maybe a Chilton book would help.

Realy appreciate your input.....I'll take your suggestions
Reply With Quote
  #7  
Old 12-18-2004, 07:15 PM
B33p3r B33p3r is offline
AF Regular
 
Join Date: Dec 2004
Posts: 458
Thanks: 0
Thanked 2 Times in 2 Posts
Re: Windshield Washer pressure problem

Quote:
Originally Posted by hughw
On my 2000 SES , the driver side windshield washer nosel sprays barely to the bottom of the windshield...and the passenger side sprays about 1/4 the way from the bottom....Has anyone had experance with this problem....Is the pump shot?....is the hose stopped up or do the nosels get stopped up enough to cause this problem.?...Any Fixes ?

I have seen this problem on a '97 Taurus. Check your washer fluid hose under the hood. Mine was dryrotted and had a hole in it. Have someone activate the washers while you look under the hood and I'll bet you find it! Good Luck!
Reply With Quote
 
Reply

POST REPLY TO THIS THREAD

Go Back   Automotive Forums Car Chat > Ford > Taurus | Taurus Wagon


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 07:09 PM.

Community Participation Guidelines | How to use your User Control Panel

Powered by: vBulletin | Copyright Jelsoft Enterprises Ltd.
 
 
no new posts