how to install Koni Yellows?

[Zanark]

Um Ive seemed to have fucked myself pretty good. Right now my car is riding on Tokico Hp Series struts and springs but the struts are blown after only 2 months (go figure) and I found a set of four konis for a damn good price. Problem is my parents threw away my stocks shocks when they cleaned up the garage. I have read that you need the stock strut housing to install konis? Is there any way I can use the Tokicos strut housings for this or some other way I can get these to install?

[eckoman_pdx]

Koni yellows for 92-00 civics are not a cut-a-strut design, I believe that the 94+ teg ones are also not a cut-a-strut design, so you should be fine their. However, I know on 92+ civics you need the brake-hose bracket off the stock shocks. The Tokicos have it welded on so it won't come off happily. Genrally, it pounds right off the stockies with ease. I don't know if you need that part for their teg shocks, though I assume you do.

If I were you, I'd give Koni a call and talk to someone in the tech deptartment.

Koni North American
www.koni-na.com
859-586-4100