|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
11-04-2004, 02:08 PM
|
|||
|
|||
|
87 crx alternator
i have an 87 crx and i had to replace the alternator and i got the old one out alright but this new one is goin in hard and i dont know what to do i tried everything and it wont go my last resort is to pull the engine up and i really dont feel like doin that if you guys or girls have any answers i would really like to hear them thanks much...
|
|
#2
11-04-2004, 02:57 PM
|
|||
|
|||
|
Re: 87 crx alternator
I had the same problem with mine. Is it hitting the upper bracket? I bent my bracket when I pulled mine out and the new one wouldn't go in. I just pulled it back straight in line and she lined right up.
|
|
#3
11-12-2004, 08:27 PM
|
|||
|
|||
|
Re: 87 crx alternator
it should bolt right in. I had the same problem except i used an alternator from an integra.
__________________
Currently Driving/Modding: Back home in Cali-87 HF CRX "Converted to RWD and K20 Swap" 91 Skyline R32 GTS-T
|
|
#4
11-13-2004, 04:02 PM
|
||||
|
||||
|
Re: 87 crx alternator
The best thing to do is to put your car up on jackstands, take off the driver's side tire, take the bolt out of the front driver's side engine mount while supporting the motor with a floor jack, and genlty lower the motor a little, until you can take it out. That will be your easiest method.
__________________
"Short, sweet, and to the point" 1987 CRX Si - Project Si 'RexSi' 1996 Ford Thunderbird 4.6L V8 - Plastic Intake Manifold, FTL. 2004 Nissan Sentra, 1.8s - The "s" stands for smooth....... ?
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
