|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#16
|
|||
|
|||
|
If your getting a CTS code before the car even gets warm id think about maybe getting a new ECM. Those go bad too, just like any other electrical part. The CTS wouldnt prevent the car from running normally, jsut give you shitty gas mileage.
|
|
#17
|
||||
|
||||
|
Re: 92 Lumina 3.1 Will not stay running.
Quote:
|
|
#18
|
|||
|
|||
|
Re: 92 Lumina 3.1 Will not stay running.
Connection on CTS was bad, cleaned up and reconnected so far no problems, found 4 dry rotted vacumm hose and expect to find more.
|
|
#19
|
|||
|
|||
|
Re: 92 Lumina 3.1 Will not stay running.
I had my mech at work look at car today, port hole for EGR was packed solid with soot and a couple of cracked vacuum lines. Car running like a champ. I want to thank everyone for all there input.
|
|
#20
|
|||
|
|||
|
Re: 92 Lumina 3.1 Will not stay running.
i just had somethin happen to my car today. there is white smoke comming out from the muffler and it smells like gasoline. also the engine sounds like its trying to stay on. but its stumblign. any help. I just got this car as a gift from my father
|
|
#21
|
|||
|
|||
|
Re: 92 Lumina 3.1 Will not stay running.
white smoke? Usually indicates you're burning anti-freeze. What year and engine?
|
|
#22
|
|||
|
|||
|
Re: 92 Lumina 3.1 Will not stay running.
92 3.1 multiport
|
|
#23
|
|||
|
|||
|
head or intake gasket. A compression test should tell you which.
|
|
#24
|
|||
|
|||
|
Re: 92 Lumina 3.1 Will not stay running.
which is the worst to replace?
|
|
#25
|
|||
|
|||
|
Re: 92 Lumina 3.1 Will not stay running.
head gaskets are a little more work, and a little more money, but you have to take the intake off to replace head gaskets anyway.
|
|
#26
|
||||
|
||||
|
Re: Re: 92 Lumina 3.1 Will not stay running.
Quote:
|
|
#27
|
|||
|
|||
|
Re: 92 Lumina 3.1 Will not stay running.
just replaced the spark plugs. they were soo black. the back sparkplugs were a pain but we managed.
the engine seemed to run smoother but it sounds liek it wants to stall. |
|
#28
|
|||
|
|||
|
Did you make sure the plugs were gapped right before you put them in? You could also try an idle relearn.
|
|
#29
|
|||
|
|||
|
Re: 92 Lumina 3.1 Will not stay running.
yea my friend did them at .45
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|