suggestions and advice on a certain setup... - Page 2

eclipse2quick21 · #16 10-30-2004, 11:57 AM

Quote:

Originally Posted by whtteg

Well it all depends on the specs of the cams you use, and if you are talking about static C/R or dynamic C/R. The cams will change the static C/R to the dynamic C/R when installed. Basically if you buy 9.2 C/R pistons and you install a cam with a higher lift and more duration then you will not have 9.2 C/R anymore it will be less.

ok, thanks for all the help everyone.

boosted k20 · #17 10-31-2004, 04:18 PM

Quote:

Well it all depends on the specs of the cams you use, and if you are talking about static C/R or dynamic C/R. The cams will change the static C/R to the dynamic C/R when installed. Basically if you buy 9.2 C/R pistons and you install a cam with a higher lift and more duration then you will not have 9.2 C/R anymore it will be less.

good shit

POST REPLY TO THIS THREAD