-
Grand Future Air Dried Beef Dog Food

Carnivore Diet for Dogs

Air Dried Dog Food | Real Beef
Go Back   Automotive Forums Car Chat > Ford > Crown Victoria
Register FAQ Community
Reply Show Printable Version Show Printable Version | Subscription Subscribe to this Thread
 
Thread Tools
  #1  
Old 10-23-2004, 02:32 AM
bmc-s bmc-s is offline
AF Newbie
 
Join Date: Oct 2004
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Unhappy Intermittant wipers quit on 98 CV. Help?

I have a 98 CV. The intermittant wipers quit on it the other day. When it is put in intermittant mode, no matter which level, they just run continuously. When you turn them, they stop instantly in whatever position they were when you turn them off. (They don't "park"). I was told it was the relay box under the dash. So, I took the ashtray out, found the box and removed it. I was told one out of a 92 CV would work. I took the one out of a 92, plugged the one out of the 98 into it, and the thing worked fine. I put the one out of the 92 into the 98, and still had the same problem of no intermittant wipers. I was told it was NOT in the multi-switch on the steering column because they just "don't go bad". I was told to see if the motor itself was grounded. It wasn't, but grounding it did not help. Any suggestions? It really sucks to have to turn them on every 30 seconds in a mist, and get the timing right to turn them off when they are at the bottom of the windshield. Can't just leave 'em on either because the dry rubber really makes an annoying noise on the dry windshield. Help? Please? Thanks
Reply With Quote
  #2  
Old 10-23-2004, 07:37 PM
ModMech's Avatar
ModMech ModMech is offline
AF Enthusiast
 
Join Date: Jan 2004
Posts: 1,496
Thanks: 0
Thanked 1 Time in 1 Post
Re: Intermittant wipers quit on 98 CV. Help?

Um you were told WRONG. The MFS in the column is one of the MOST common problems with the CVs. Besides, you just proved it was not the box, and if it were the wiper motor itself, it would not work at all (or only one one speed).

Check ALL the fuses, if the "park" fuse or circuit goes bad the wipers will not park. The "park" terminal should have +12V at ALL TIMES with the key in the "run" position. If not, find out why.
Reply With Quote
  #3  
Old 10-23-2004, 09:36 PM
bmc-s bmc-s is offline
AF Newbie
Thread starter
 
Join Date: Oct 2004
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Re: Re: Intermittant wipers quit on 98 CV. Help?

I checked every one of the fuses, under the dash, and under the hood. They are all good. Thanks for that idea. Any more suggestions?
Reply With Quote
  #4  
Old 10-24-2004, 12:09 AM
ModMech's Avatar
ModMech ModMech is offline
AF Enthusiast
 
Join Date: Jan 2004
Posts: 1,496
Thanks: 0
Thanked 1 Time in 1 Post
Re: Intermittant wipers quit on 98 CV. Help?

Check for power with the key in "run" to the park wire at the motor. If it is there, the motor is bad, if not, look at wiring or the MFS.
Reply With Quote
  #5  
Old 10-24-2004, 01:30 AM
bmc-s bmc-s is offline
AF Newbie
Thread starter
 
Join Date: Oct 2004
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Ok. Iw ill just have to see if I can locate that particular wire. I can see the plug from the drivers side, so it shouldn't be too hard to get the wires.
Reply With Quote
 
Reply

POST REPLY TO THIS THREAD

Go Back   Automotive Forums Car Chat > Ford > Crown Victoria


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 02:56 AM.

Community Participation Guidelines | How to use your User Control Panel

Powered by: vBulletin | Copyright Jelsoft Enterprises Ltd.
 
 
no new posts