|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| 240Z | 260Z| 280Z | 300ZX (Past Z Cars) The original Z cars - ones that started it all. |
![]() |
Show Printable Version |
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
|
|||
|
|||
|
spark plugs
86 n/a, what has to be removed to change spark plugs. Does anyone have any printable instructions?
|
|
#2
|
||||
|
||||
|
Re: spark plugs
nothing i don't think... all you need is an extension and a u-joint and you're good to go, the front left one is a little tough to get at, you need to unhook some connectors to get at it.. just be careful and make sure you don't break any of them (1st hand experience on that one) having a spark plug socket is really handy with this car, as there's absolutely no way you're going to get anything else down there to pull the plug out
__________________
ZedEx Crew Member #61988 300zx turbo 5spd. 3" mandrel exhaust, filter, afco rad, e-fan, poly engine mounts, mbc at 8.5 psi, turboxs rfl-h bov, gutted plenum, etc. blown turbo, under construction.. gt35 coming. |
|
#3
|
||||
|
||||
|
Re: spark plugs
always use a spark plug socket. much much much easier on you.
-Jared
__________________
![]() ZedEx Crew Member #2
|
|
#4
|
|||
|
|||
|
And blow air around the plugs before you remove them so shit don't get inside your engine.
|
|
#5
|
|||
|
|||
|
Re: spark plugs
and make sure you torque them in there right, too much and you crack them, to little and they will blow right out. Both cases are BAD.
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|