|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
10-03-2004, 08:39 AM
|
|||
|
|||
|
'78 rotated diff.?
I bought a '78 Bronco frame with suspension and axles to go under my '64 CJ6 Jeep. Long story....here's the ?....after I got the frame home and cleaned it all up I noticed that the front axle (Dana 44 reverse cut under coils) has had the diff. rotated on the shafts. Whoever did it was a retard...the welds look like a 3 yr old did it and they didn't bother sealing all the way around. So they finished with silicone caulking!!! Is this a viable method of rotating a coiled axle?? Or did they totally screw it up and I have to find another one to replace it?
|
|
#2
10-03-2004, 08:40 AM
|
|||
|
|||
|
Re: '78 rotated diff.?
Ford & Jeep 4X4 nut
|
|
#3
10-12-2004, 04:22 PM
|
|||
|
|||
|
Re: '78 rotated diff.?
I dont know why anyone would need to do that to the axle. On that modle it has a reversed spiral D44. With the pinion so high why? Sounds like you may have some work ahead of you with that one.
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
