|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Let's get Technical! Discussion for hardcore in-depth motor heads! |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
10-05-2004, 05:55 PM
|
|||
|
|||
|
that dam oil.....
Finally got to get a good look under my accord, it had been slowly dripping oil, and it turns out that when the car was still with its previous owner, some retard jacked it up from the oil pan becuase its got the signs of it and I can tell it wasn't from bottoming out, and now its leaking slowly from the small little dingy crack.....
I don't want to get a pan from the junk yard right now if I don't have to, I just want to know is there any glue or sealment that would work nicely? Probably not but I had to ask... Ahhh, Clutchblood dumplings 
|
|
#2
10-06-2004, 02:42 PM
|
|||
|
|||
|
Re: that dam oil.....
JB weld might be a possibility. But I would replace that thing. Not a hard project.
__________________
************************ 2001 Honda Prelude SH DC Header 3" Intake with K&N GReddy Exhaust Unorthodox Racing Pullies JET enhanced ECU 10.3 OBX Plug Wires
|
|
#3
10-06-2004, 07:24 PM
|
|||
|
|||
|
you can drop your oil pan and have a welder add some metal to it to seal the crack
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
