|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
|
|||
|
|||
|
hello everyone who sees this.
i have a 2001 SS i want to do some modifications to my car but i have no i dea what to add. i want to start small and dont want to spend more than $500 please help. if i decide to spend more can you still list some more mods not more than $3500. |
|
#2
|
|||
|
|||
|
Re: mods for an SS
have you done all the free mods first???
__________________
![]() 95 Z28 Black on Black on Black. Mods: 355CI and lots more... Originally Posted by Mordant I'd say if they ask about material possessions then it's fair game to ask them what kind of underwear they wear, may as well get both sides expectations on the table as soon as possible. |
|
#3
|
|||
|
|||
|
no i have not done the free mods please advise
|
|
#4
|
||||
|
||||
|
Re: mods for an SS
theres a thrad near the top right now on em.
__________________
97 Camaro - 2.077 60', 14.745 @ 92.20 - still down, one year later. 194k miles-160* thermo-V8 shocks/springs (V6 rear springs)-3" Magnaflow !cat (3" dynomax bullet) back-SLP CAI-stock boxed LCAs-poly tranny mount and torque arm bushing-custom HPTuners tuning-4.10s/eaton/TA girdle-3.5" alum DS-spohn LCA brackets-prostar skinnies 179.75 RWHP, 204.52 RWTQ ON ITS WAY: MORE R.I.P. Andy 87 Benz 190e - DD 01 EX250 - still gotta get my license for this thing |
|
#5
|
||||
|
||||
|
Re: mods for an SS
thread*
__________________
97 Camaro - 2.077 60', 14.745 @ 92.20 - still down, one year later. 194k miles-160* thermo-V8 shocks/springs (V6 rear springs)-3" Magnaflow !cat (3" dynomax bullet) back-SLP CAI-stock boxed LCAs-poly tranny mount and torque arm bushing-custom HPTuners tuning-4.10s/eaton/TA girdle-3.5" alum DS-spohn LCA brackets-prostar skinnies 179.75 RWHP, 204.52 RWTQ ON ITS WAY: MORE R.I.P. Andy 87 Benz 190e - DD 01 EX250 - still gotta get my license for this thing |
|
#6
|
|||
|
|||
|
Re: mods for an SS
i saw them i dont want to take anything out of the engine or rear seat, the wrapping the of the headers sounds good
|
|
#7
|
|||
|
|||
|
Re: mods for an SS
does a cold air induction system work real well from (SLP) with my ss or i dont need one
|
|
#8
|
||||
|
||||
|
Re: Re: mods for an SS
Quote:
__________________
97 Z28 C.A.I. Edelbrock shorties,all free mods,Borla's,MSD,LT4 timingchain, 1.6r/r,LT4 cam, NGK,p&p heads,ported maf ,52mmTB adj fuelpressure reg.,373's,pcm tune by pcmforless, all poly bushings,spohn t/a, s/t brace, etc. What I don't have..no egr no air pump and no cats Well dip me in chocolate and throw me to the lesbians!!!!!
|
|
#9
|
|||
|
|||
|
Re: mods for an SS
!EGR Free Mod
http://installuniversity.com/install...sity/index.htm Throttle Body Bypass http://installuniversity.com/install...sity/index.htm Throttle Body Bump Stop Mod http://installuniversity.com/install...sity/index.htm PCV Modification Installation http://installuniversity.com/install...sity/index.htm http://installuniversity.com/install...sity/index.htm 160 Thermostat Swap http://installuniversity.com/install...sity/index.htm Free Ram Air Modification http://installuniversity.com/install...sity/index.htm IAT Timing Tricker http://installuniversity.com/install...sity/index.htm !CAGS Skip Shift Radio Shack Resistor http://installuniversity.com/install...sity/index.htm And yes get a aftermarket lid... A lid is a lid is a lid... Any will work just stay away from the Granitalli one, it sucks...
__________________
![]() 95 Z28 Black on Black on Black. Mods: 355CI and lots more... Originally Posted by Mordant I'd say if they ask about material possessions then it's fair game to ask them what kind of underwear they wear, may as well get both sides expectations on the table as soon as possible. |
|
#10
|
||||
|
||||
|
Re: Re: mods for an SS
Quote:
__________________
R.I.P. Andy...It was an honor to have known you. ![]() '01 Camaro SS - SLP Short Throw Shifter, Granatelli Air Lid, blue neon underbody kit '92 Chevy 1/2 ton 4X4 - 350 w/ 190,000 miles and in desperate need of a rebuild. '86 Chevy S10 - 350 w/ 400 Turbo trans, B&M Pro-Ratchet, 4.56 Posi, 350 is gone and slowly being replaced. |
|
#11
|
|||
|
|||
|
Re: Re: Re: mods for an SS
Quote:
Whisper, SLP, I'm sure I'm leaving some out, and my favorite is Stealth are all better built, IMO...
__________________
![]() 95 Z28 Black on Black on Black. Mods: 355CI and lots more... Originally Posted by Mordant I'd say if they ask about material possessions then it's fair game to ask them what kind of underwear they wear, may as well get both sides expectations on the table as soon as possible. |
|
#12
|
|||
|
|||
|
so i should put the cold air from (SLP), and rap the headers since they are stock, and put a strut bar for handling. those the cold air change the air box? or i should buy the cold air an a new air box from (SLP)
|
|
#13
|
|||
|
|||
|
Re: mods for an SS
i am also going to have the tranny flush (6 speed), and the radiator, and the fuel injection also . should i do it, my car has 60,000 miles
|
|
#14
|
|||
|
|||
|
Re: mods for an SS
Quote:
do not wrap the headers, your car is not a race car and you will casue a fire because you will not keep replacing the wrap... strut tower bars are great.. Quote:
__________________
![]() 95 Z28 Black on Black on Black. Mods: 355CI and lots more... Originally Posted by Mordant I'd say if they ask about material possessions then it's fair game to ask them what kind of underwear they wear, may as well get both sides expectations on the table as soon as possible. |
|
#15
|
|||
|
|||
|
cool then i will flush those parts, and i will buy an air lid from (SLP), and the strut bar. so do i also buy the cold air induction system.
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|