>Removing badges<

[JustAdWater]

Im trying to make my sentra look less stock so im thinking about removing the badges ("Sentra" & "GXE") any one have any opinion on doing this, and do they just come off, or is there little holes behind them. Also how would you reccomend i remove them. Thanks

[sr20de4evr]

heat them up with a hair dryer or heat gun, then get something soft but strong (like dental floss) and slide it beneath the badge to "cut" the glue. They come off pretty easily, and there are no holes at all on any of the badges, even the plastic Nissan one at the top.

[illbeatyourhonda]

good method i debaged my sentra very similar, i used a razor blade and heat though...next time ill try the flos thing...sounds like it would work to me.

[JustAdWater]

Hey heres a little follow up...i got the GXE off, and im planning on doing the "sentra" too, i tried the floss thing, and that didnt work i just used a flathead screwdriver (i was careful).

[sr20de4evr]

why didn't the floss work?

you could try fishing line if the floss was too weak and broke, or if you want something else you could try one of those rubber putty knives.

[JustAdWater]

The putty knife woulda been good but the flat head did the trick, didnt scratch it. I got the "SENTRA" off so now all thats on the trunk it the Nissan which im leaving alone. Could someone tell me how to put pictures on? Thanks.

[sr20de4evr]

sounds good

one more thing, you might want to put a coat of wax over the area that the badges were just in case the car was waxed after the badges were on, or the glue holding the badges screwed up the wax. It's a good idea either way


and you need a host to put pictures up

[JustAdWater]

Alright, im planning on waxing it next weekend. What do you mean by a host, if you could explain that to me it would be great

[sr20de4evr]

a web host, where you can upload your files and access them through a URL. Normally they either cost money or they're riddled with ads