94 Camry wagon brake light replacment

[Yacob]

I need to replace a rear brake light in the back door but can not figure out how to get into the unit. It is probably very simple but I just don't want to ruin the rear panel getting in the wrong way.

[Brian R.]

If you're referring to the high-mounted brake light, the cover comes off by inserting a pointed object into the round clips. They are inserted by pushing the pin back through the clip, inserting the clip in the holes, and then pushing the pin back through.

[Yacob]

Originally Posted by Brian R.

If you're referring to the high-mounted brake light, the cover comes off by inserting a pointed object into the round clips. They are inserted by pushing the pin back through the clip, inserting the clip in the holes, and then pushing the pin back through.

I am actually referring to the lower brake lights. There don't have an obvious access that I can see.

[Bossman]

Your owners manual should have illustrated instructions on how to replace any light bulb in your Camry. Best of luck!

[Yacob]

Originally Posted by Bossman

Your owners manual should have illustrated instructions on how to replace any light bulb in your Camry. Best of luck!

That would work great if I had an owners manual, but I don't. Any suggestions?

[Brian R.]

Are the lights you are talking about on the door or the body?

[Yacob]

Originally Posted by Brian R.

Are the lights you are talking about on the door or the body?

The light I need to replace is on the door.

[Brian R.]

You have to open the door and remove the inner panel that covers the area where the light is at. Probably by prying it off with a taped screwdriver. Then there are 4 nuts that hold on the exterior lens assembly.