|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
|
|||
|
|||
|
i have a 1994 accord ex with an automatic transmission and i don't know what's the difference between D4 and D3? which one is for regular driving, and which one is better for racing?
thanks
|
|
#2
|
|||
|
|||
|
good question i wanna know the same thing.........
|
|
#3
|
|||
|
|||
|
just for the record this post WAS 2 months old but anyway the difference is d4 is "overdrive" think of it as either leaving a manual in third or shifting to fourth...this should be apparent just by driving the car
__________________
|
|
#4
|
|||
|
|||
|
Re: auto transmission question?
FYI, I was told that the Honda AT is, in effect, a 4-speed transmission, with technology to make it automatic.
So, that means that D3 is 3rd, and D4 is 4th (direct drive), not overdrive. No doubt with a calculator, the Haynes manual (to tell me the final drive ratio) and a trip down the road paying attention to the tach and speedo would confirm this. But I haven't felt the need to actually go that far. |
|
#5
|
|||
|
|||
|
Re: auto transmission question?
If you are driving on terrian where the car is constantly shifting up and down between 3rd & 4th put in 3rd.
If it has enough torque that it is staying in 4th (level road, going on a trip, interstate highways) then use 4th. Feel the need for a bit more power up a slight hill go back down to D3 manually for a bit. D3 = higher RPM's = more power = more gas D4 = lower RPM = less power = better fuel economy |
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|