|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
|
|||
|
|||
|
Replace 096 with a 01M trans?
I have a '94 Jetta III GL with a bad 096 auto trans and I've come accross a '96 2.0 engine and trans.
I believe the '96 trans is an 01M. Can my 096 be replaced with this? If so do I need to replace the computer too? Any input would be appreciated. Thanx |
|
#2
|
|||
|
|||
|
Re: Replace 096 with a 01M trans?
They will fit, but are very different. You would have a very difficult time trying to make the electronic part work with your ECM or another ECM work with your fuel system.
|
|
#3
|
|||
|
|||
|
Thanx for the advice. I think I will wait it out.
If I ever get the time I would like to try to rebuild it myself. I have rebuilt standard transmissions but never attempted an auto. Are they alot more difficult and do I need to do anything with the ECM after the rebuild and install? Thanx again. Scot |
|
#4
|
|||
|
|||
|
Re: Replace 096 with a 01M trans?
The 096 should be easier than the 01M, but I haven't done either. I don't think there is anything special that has to be done after going through the 096.
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|