|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
|
||||
|
||||
|
how much does a 351 weigh?
i gotta pull my 351 out of my bronco (i was the one with bad piston rings and god knows what else) do i need a 1000lb engine stand or a 2000lb. the $ difference is $50, so if i can get by with the 1k, i would like too. thx!!!!
Last edited by fordforlife; 07-14-2004 at 05:52 PM. |
|
#2
|
||||
|
||||
|
The 1K will do ya fine. I pulled a 400 out of my friends truck with a 1 ton and another friend of mine put a 460 in a bronco with a 1 ton. Now if your lifting a diesel thats a different story.
__________________
92 Mustang GT, 347 Stroker(Forged Steel Crank/Rods-Balanced, Forged Alum Dished Pistons), B50 Block, Track Heat Intake, Twisted Wedge Heads w/ Stage 3 port/polish, 80mm C&L MAF, FMS 30# Inj., BBK AFPR, Trick Flow Stage 2 Cam, Trick Flow 1.6R Rockers, BBK EL-CC Headers, MAC O.R. H-Pipe, Flowmaster Cat-Back, Accufab 75mm TB, MAC CAI, BBK Pulleys, Griffin Alum Radiator, Mark 8 Fan, MSD Pro-Billet Distributor; AOD, Dynamic 3300 L-U Converter, B&M Trans Cooler; 3:73 gears. |
|
#3
|
||||
|
||||
|
Re: how much a 351 weighs
1 ton = 2000lbs
|
|
#4
|
||||
|
||||
|
Re: how much a 351 weighs
im renting an engine hoist, im talking about the stand to store it in my garage. 1000lbs or 2000lbs? its the kind where the engine bolts onto it.
|
|
#5
|
||||
|
||||
|
Oops, I meant 1000lb on all that, not one ton.
__________________
92 Mustang GT, 347 Stroker(Forged Steel Crank/Rods-Balanced, Forged Alum Dished Pistons), B50 Block, Track Heat Intake, Twisted Wedge Heads w/ Stage 3 port/polish, 80mm C&L MAF, FMS 30# Inj., BBK AFPR, Trick Flow Stage 2 Cam, Trick Flow 1.6R Rockers, BBK EL-CC Headers, MAC O.R. H-Pipe, Flowmaster Cat-Back, Accufab 75mm TB, MAC CAI, BBK Pulleys, Griffin Alum Radiator, Mark 8 Fan, MSD Pro-Billet Distributor; AOD, Dynamic 3300 L-U Converter, B&M Trans Cooler; 3:73 gears. |
|
#6
|
||||
|
||||
|
Re: how much a 351 weighs
The 1000lb engine stand should be more than plenty.
|
|
#7
|
||||
|
||||
|
Re: how much a 351 weighs
thx!!
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|