MPFI Sensor???

[dssmax]

Hi All,
O.K. First off I did try a search but I could not find any info on this sensor or where it hooks up to...

Here is the thing, I can't seem to find any info on this sensor, if it in fact is a sensor.

I'm doing a MPFI swap and would like to know where does this plug in to and what is it called.

I checked out
http://www.fourthgenhatch.com/mpfi.html
and
http://www.binghamtonlife.com/manual/manual.htm
and
http://www.4thgenerationcivic.com/how-to's/mpfi_conversion.htm
And a few others but never came across that sensor...




Thankx,
MAX

[T-Mo]

what intake is that???

[dssmax]

Its off a 89 Si...

[91civicDXdude]

fast idle valve. you dont have to hook it up.

[dssmax]

fast idle valve??

Hrmm, what does it do?

Thanks again for your help.
MAX

[Cjz89civic]

Controls fast idle. LMAO really thought it controls idle over 750 rpm to 1100 rpm (hmm 1100 or 1200). When under load it idle.

[dssmax]

Hey,
B2 on the ECU is the Fast Idle Control Solenoid Valve..
May be I could hook it up and make it work..

Thankx,
MAX

[Cjz89civic]

you could but you dont have to.

[nsxvtec]

Hi,

I don't know where you hail from but if you are driving in seasonal area with low ambient temps and coolant temp below 14 Deg F with engine speed below 1800 RPM, the FICSV activates to increase the air flow rate for fast idle. It gets below 14Deg. F here (TO) so I need it.
Bl/Yel wire connects to #14 fuse and the Bl wire to ECU.
hope this helps

I am going the other way from SI to ZC and will drill and tap ZC manifold for FICSV as no replies to my post so far about this. I have also searched the sites and forums.

[audioquattro]

200 SQ. FT. OF SHADE!!!!!!!!


hehe

but seriously...you dont need it