|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
07-05-2004, 06:09 PM
|
|||
|
|||
|
91 LX parking gear release
The push button release to get the transmission out of park on the shifter on my 91 LX won’t release the shifter. Took the console apart and if you push on the white plastic thing the cable attaches to it’ll pop out. If you take the cable off it’ll work too but then you don’t have any protection from getting the transmission out of park without stepping on the brake or having the key on. Seems the cable or something associated with it might be the problem but I can’t find anything in my Haynes about it. Anybody seen this or know what to do to make it work right again?
Thanks. 
|
|
#3
07-05-2004, 11:23 PM
|
||||
|
||||
|
I had a similar problem a while back. I took the T handle off and just pushed the button manually for a while.
__________________
92 Mustang GT, 347 Stroker(Forged Steel Crank/Rods-Balanced, Forged Alum Dished Pistons), B50 Block, Track Heat Intake, Twisted Wedge Heads w/ Stage 3 port/polish, 80mm C&L MAF, FMS 30# Inj., BBK AFPR, Trick Flow Stage 2 Cam, Trick Flow 1.6R Rockers, BBK EL-CC Headers, MAC O.R. H-Pipe, Flowmaster Cat-Back, Accufab 75mm TB, MAC CAI, BBK Pulleys, Griffin Alum Radiator, Mark 8 Fan, MSD Pro-Billet Distributor; AOD, Dynamic 3300 L-U Converter, B&M Trans Cooler; 3:73 gears.
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
