VTEC Quit!!!

[mdg97222]

VTEC No MORE!!! HeLp: (this post)

hey Guyzz thought id come to the best place for answers i could find so here i am..
ok Im tryin to keep from a dealer ripoff
I have a 93 prelude engine (H22a1) and My check engine light comes on at arround 5800 RPM (VTEC engagement) the code says 22= Vtec oil pressure switch.. ok so i replace it, reset the code and i can herar a noise at the right rpm but still no VTEC and the light comes on again with the same code AAAAHH i cant afford to have a dealer rip me off for diagnosis and mabey this will help another guy too hehe
ALL replies considered and appreicated from a true Fonda-Honda dewd
L8tes thanx!!

[b16a3sol]

how is the oil level in your car? if its trying to engage it, but cant, more often that not its because it doesnt have enough oil pressure to do it.

[crxlvr]

yeah check or change your oil, the most common problem for VTEC not workin is low oil levels, without oil VTEC wouldnt work.

[mdg97222]

ok thanx good idea,
well when i put the new switch in i added too much oil so il have to drain some of it, but i still getthe code 22 check engine light

[drift]

remove solenoid.

replace screen filter.

install new gasket.

reinstall solenoid.


if that dont fix it after the oil level being good and the sensor swapped, then you're up shit creek without a paddle.

[mdg97222]

great idea , i didnt even know that could be done but one thing ...WHERE is the soloniod?? impossible to get to ? thanx man

[ric]

its the little barrel looking thing right next to the vtec oil pressure switch. it looks like a mini iacv

[Smoakie976]

HEy man I am having the same problem but my CEL is always on and I have not read the codes yet, but the CEL is always on because My O2 censor is not hooked up...so I thought that there was no problem until I was not getting vtec anymore and then I got pissed, but I do not have the time to take it to the shop and I am afraid to see how much it is going to cost...is the vtec solinoid expensive....what should I check I have been without vtec for like 3 months now....but every once in a while it will work....like when it is raining outside...funny huh? help me out please....need vtec!

[mdg97222]

hi well i tried what you suggested, the screen was clean so i did not replace it BUT the C.E.L doesnt come on anymore !! yay for that BUT i do not notice the VTEC coming on like i did b4 but i dont get any more codes so i duno ...i still need to drain some oil but weather prevents that anytime soon.. i need to get a new top speed run and see if its affected

as for the other guy with the problem yer C.E.L. should flash you 2 codes one for 02 sensor and one for the other

Is there anyway to test the solonoid with out driving it ?? liek under the hood? or other things to test for??
thanx again!!

[Kill4A911]

think it could be the knock sensor?

[mdg97222]

Well Shit forget what i said in my last post the dam light came on again so nothing is fixed... same code 22 i totaly clueless now and to broke to get it looked at i doubt it would be the knock sensor. unless the C.E.L code camer up for it.. but on mine it didnt

[drift]

Originally posted by mdg97222
Well Shit forget what i said in my last post the dam light came on again so nothing is fixed... same code 22 i totaly clueless now and to broke to get it looked at i doubt it would be the knock sensor. unless the C.E.L code camer up for it.. but on mine it didnt

all you can do now is inspect your wiring.

[mdg97222]

o god noooo i hate wiring uhh!! thats the last road i wanna go down
besides there only a tiny fraction of the wiring i can check anyway let alone where and what ones to checksince ther all bundled up what a night mare i dont think its werth all this trouble might be time to sell my baby..

[motomanred]

did you ever figure it out? i have the exact problrm and it's driving me nuts!