More Speaker Questions

[MunG35]

Hey everyone, last time I started a thread like this, you all gave me some good ideas such as:

- Go 6x9's in the back
- The car is pre-wired for the rear speakers.

Now I have some follow up questions...

- How do I remove the rear deck for speaker installation?
- How do I make the holes for 6.5" speakers into holes for a 6x9's as the holes are in the frame of the car?

Thanks In Advance

- Mun-G

[MunG35]

No one??????

[18sHonda]

1st off what year is your car bro? THe back your gonna have to get a spacer so it pushes it up its gonna look odd cause it'll stick up about an inch and a half. But the spacers it just basically a spacer which will allow you to drill into the regular 6.5 holes.As for removing the back I didnt have to so I dont see why you would need to unless your doing some custome fiberglass job... hope that helped.

18s

[MunG35]

as in the sig the cars a 95 civic sedan dx with AT... there are no holes in the rear deck for speakers, wouldnt i have to remove it to cut out holes for the speakers?

another option i was considering would be buying 6x9 speaker boxes and velcroing them down onto my rear deck facing inwards on the car... i saw some stuff like that?

Any opinions?

[DeejAdrn]

the best way to to this is to remove the panel and make those 6'1/2 to 6'x9' and drill thoes bitches as hard as you car ! It improves the sound quality . anyways is you tryin to get loud and better sound, i recomend that you had and Amplifier also and a crossover for better frequency quality ! and stuff ! you know ! If you need any help just let me know ! Im prety sniky on this shit ! p.s. Scuse mah language !