|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
06-16-2004, 10:27 PM
|
|||
|
|||
|
Questions regarding rear camber weird reading.
Hi guys,
I just got my car lowered an aligned. I have TEIN SS on A 00 Accord V6 coupe and the rear is lowered about 2". I also havea rear Ingalls adj. camber/toe kit. I'm rolling on 225/40/18 +48 offset These are the specs they gave to me -.8 Camber -1.4 2.5 Caster 2.6 .04 TOE .04 Rear -.7 Camber .8 .09 TOE .06 Doesn't the rear look really off? I'm thinking about brining it back to have them fix it, but what should I have them set it to? I'm having troubles figuring out how to read these numbers as well. thanks guys 
|
|
#2
06-17-2004, 10:17 PM
|
||||
|
||||
|
Re: Questions regarding rear camber weird reading.
The problem is, everything is off, but those numbers are probably within specs. They were being lazy and once they got it to specs they just quit. I would take the slip back in and see if you can't get something done about that.
|
|
#3
06-18-2004, 12:28 PM
|
||||
|
||||
|
Re: Questions regarding rear camber weird reading.
Did you make sure each corner is lowered the right amount? Measure from the center of the wheel to the fender?
__________________
Sponsored by: KAM Racing Sports, Falken Tires, Finish First Polish, Brady's High Performance, Taggart Performance Engineering, Rotora Brakes Autocross is: 90% driver, 5% car, & 5%  CRAZY MOJO!Autocross Help Page Buy my Civic parts!
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
