|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
06-09-2004, 11:38 PM
|
|||
|
|||
Headlight Module
Recently I changed a headlight module on my 1988 Fiero.
Everything was fine for a couple of weeks, worked great. Now the driver side motor wants to keep spinning for about 5 seconds after they are turned on. Is there some adjustment that has to be made or is something else wrong? Any help would be GREATLY appreciated. THANKS ALL! JoeZamp 
|
|
#2
06-14-2004, 06:57 AM
|
||||
|
||||
|
Re: Headlight Module
The stop switch inside the motor is probably worn and corroded, but the vibration of the motor eventually turns it off - one of mine does the same thing going down. Rebuild the door motor and you should be fine.
__________________
Wanted to buy: 86-88 Fiero GT, 5 speed, fixer-upper. Blown motor, no motor? No problem! Rusty unibodies need not apply. 74-79 Ramcharger or 100, slant or no motor - not interested in v8 - Overdrive 4 is a big plus, NO hopeless rust buckets!!!  3Rd gen F body floor pans/camaro door skin (L)  Why is it I see so many "Proud to be an American" bumper stickers on the backs of cars made in Japan or Korea??????
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
