|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
06-09-2004, 05:44 PM
|
|||
|
|||
oem air intake
Hi everyone I'm new to the forum and I have a question to ask regarding the accord v6. I own a 98 accord v6 sedan and I while back I had an aem intake install by me and my friends but since it's smog check time I ended putting back to stock intake. what I realize was some screws and bolts and nuts or missing =( I got the top or the air intake on but I'm concern for the bottom part. even though one of my friends said don't worry about it and that I'll pass smog emission I still want to put the bottom part of the oem intake on. So what I'm asking is does anybody know what bolts, screws and nuts I should get to make my oem air intake stable and does anybody know what tools I should use in order to work on slapping the air intake back into it's place? thanks if anyone can help me out there =)http://www.automotiveforums.com/vbul...cons/icon7.gif
http://www.automotiveforums.com/vbul...cons/icon7.gif 
|
|
#2
06-09-2004, 06:10 PM
|
|||
|
|||
|
to put resonator chamber you will need 10mm socket, 12" extension and wrechete.
i also suggest to get missing hardware from dealer, even its cheaper at torrington, but with shipping it will cost you more.  http://www.torringtonhondaparts.com/...R+(V6)&yr=1998
__________________
Power: Denso IK22 spark plugs, OBX Headers, J32A2 Camshafts, CT SC w/HB Electronics: Apexi VAFC (untunned) Gear Box: Rebuilt at 53K ml & at 63K ml by Aamco and still  Suspension: Eibach Sportlines, Koni Sport, Comptech Sway Bars & Neuspeed upper strut bar. Wheels: 17x7 OZ Racing Superleggara & 215/50 Dunlop Sport A2 Brakes: Legend GS 2 Piston Calipers, Goodridge SS Lines, Endless Nova Pads
|
|
#3
06-09-2004, 10:09 PM
|
|||
|
|||
|
Re: oem air intake
hey what's the top part called then if the bottom part is called the resonator champer and thanks honda 99 for helping me out. thanks for giving me the website it'll help me out alot since my honda is going to be my project car. trying to bring everything back to stock or clean =)
|
|
#4
06-10-2004, 07:03 AM
|
|||
|
|||
|
Re: Re: oem air intake
Quote:
__________________
Power: Denso IK22 spark plugs, OBX Headers, J32A2 Camshafts, CT SC w/HB Electronics: Apexi VAFC (untunned) Gear Box: Rebuilt at 53K ml & at 63K ml by Aamco and still Suspension: Eibach Sportlines, Koni Sport, Comptech Sway Bars & Neuspeed upper strut bar. Wheels: 17x7 OZ Racing Superleggara & 215/50 Dunlop Sport A2 Brakes: Legend GS 2 Piston Calipers, Goodridge SS Lines, Endless Nova Pads
|
|
#5
06-10-2004, 01:26 PM
|
|||
|
|||
|
Re: oem air intake
well just curious because I couldn't find it on the website you gave me =) wow you got alot of mods on your car how does it run?
|
|
#6
06-10-2004, 03:29 PM
|
|||
|
|||
|
Re: oem air intake
upper part of air intake you can find in AIR CLEANER section.
as far of my car; right now it doesn't run in way i want it, i need to put bigger fuel injectors, wide band oxygen sensor and get it tunned. after that i expect to see result that i want.
__________________
Power: Denso IK22 spark plugs, OBX Headers, J32A2 Camshafts, CT SC w/HB Electronics: Apexi VAFC (untunned) Gear Box: Rebuilt at 53K ml & at 63K ml by Aamco and still Suspension: Eibach Sportlines, Koni Sport, Comptech Sway Bars & Neuspeed upper strut bar. Wheels: 17x7 OZ Racing Superleggara & 215/50 Dunlop Sport A2 Brakes: Legend GS 2 Piston Calipers, Goodridge SS Lines, Endless Nova Pads
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
