-
Grand Future Air Dried Beef Dog Food

Carnivore Diet for Dogs

Air Dried Dog Food | Real Beef
Go Back   Automotive Forums Car Chat > BMW > 3 Series
Register FAQ Community
Reply Show Printable Version Show Printable Version | Subscription Subscribe to this Thread
 
Thread Tools
  #1  
Old 05-31-2004, 11:28 PM
frank mora frank mora is offline
AF Newbie
 
Join Date: May 2004
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
fuel pump

i have a 1994 325ic bmw The car wont start i already checked the fuse of the pump, and it has no juice. i jumped the fuse and the pump has juice but wont start what should i do? HELP!!!
Reply With Quote
  #2  
Old 06-02-2004, 06:38 AM
kazzoo kazzoo is offline
AF Newbie
 
Join Date: Feb 2004
Posts: 56
Thanks: 0
Thanked 0 Times in 0 Posts
I think you would only get power to the pump on crank only, after the initial prime,all depends wheather the relay is before or after the fuse.
If the ignitions ok and you direct fed the pump I'd say the pump is faulty,try giving the area around the pump a wallop whilst cranking,sometimes this starts the pump working again.
Reply With Quote
  #3  
Old 06-02-2004, 04:37 PM
theblast theblast is offline
AF Newbie
 
Join Date: May 2004
Posts: 8
Thanks: 0
Thanked 0 Times in 0 Posts
On my 91 316 the fuse is after the relay, if you got injection find your fuel pump, unplug power to it and turn key so engine turns, if you then get voltage to the cable then your fuel pump need 2 be replaced, can also try 2 hit a little on it and see if it starts afterwards, if no power then it's problem with fuse, relay or something else before fuel pump.
Reply With Quote
  #4  
Old 06-03-2004, 07:40 AM
kazzoo kazzoo is offline
AF Newbie
 
Join Date: Feb 2004
Posts: 56
Thanks: 0
Thanked 0 Times in 0 Posts
Also if you have voltage on crank at plug to pump make sure you have a good earth on the other pin,no more than 3 Ohms,any higher than pump will not run.Also just a tip,reading voltage at plug does not mean you have the correct amperage to run pump,if earth and voltage ok then use a light tester to test amperage,good light ok dim light means the cable has been restricted.Hope this helps.
Reply With Quote
 
Reply

POST REPLY TO THIS THREAD

Go Back   Automotive Forums Car Chat > BMW > 3 Series


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 05:11 AM.

Community Participation Guidelines | How to use your User Control Panel

Powered by: vBulletin | Copyright Jelsoft Enterprises Ltd.
 
 
no new posts