camber kit

[carraway13]

I am looking for a good camber kit. i am lowering my car 2".
does anyone know where i can get a good kit for around a $100.

[GScivic7]

SPC makes a good kit, Ingalls is probably the best kit.

[SlowerCivic]

go to mmrusa.com there spc kit is kinda expensive.Since your probably going to get the balljoints if you have a 92-95 civic its going to be a major pain in the ass to get the balljoints out of the stock upper control arm.So be prepared to spend lots of hours with a blow torch a hammer and a drill press.Or you could take it to local machine shop and have them take it out for the extra buck

[SlowerCivic]

Also if your dropping front and back 2 inches you will need to be the rear kit that they sell and the front.More than likely you will be spending close to 400 for it all.

[SlowerCivic]

and if you want to buy the lower control arms for the rear the only difference is that they are about a half inch shorter than the stock ones so it pulls the tire in more

[Beastiek2]

i am also looking into buying a kit as well i was told SKUNK2 made a good kit my boy has it on his teg
seems good easy to install took us like an hour yea and the price is upwards of 400$

[GScivic7]

well, if you guys want a SPC camber kit. A guy from a local board is selling them for $50 shipped. I can get his email addy and hand it out to you guys that are interested. Just PM me. BTW: it's for fronts only.

This is the info for the kit:

One Specialty Products Company Front Camber Kit That works for:
$50 Shipped!
VIGOR 91 & UP
2.5 TL 1996 & UP
2.2, 2.3 & 3.0 CL 1996 & UP
ACCORD 1990-1997
CIVIC 1988-95
CRX 1988 & UP
DEL SOL 1993 & UP
INTEGRA 1990 & UP
PRELUDE 1992 - 1996
PN#84955
Part No. 84955 - +1.75 degrees - +3.25 degrees

[Beastiek2]

no 7th gens thats a sweet deal tho