|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
05-03-2004, 12:21 AM
|
|||
|
|||
|
EGR Port pictures, 2nd gen:
I found this information on another board:
  
__________________
-Ryan Isuzu Moderator Car Show Tips Operations manager with a results-driven passion for process improvement FAQ 98-04 Isuzu Rodeo, Rodeo Sport, Amigo, Trooper SOLD - NOV2015 - 2000 Amigo, V6, HT winter, ST summer, 2wd 
|
|
#2
05-03-2004, 11:10 AM
|
|||
|
|||
|
That looks really nasty. I hope the inside of my 3.2 doesn't look that bad (but it probably looks worse!)
So, when cleaning the EGR, is the end of the tube you show the correct place to spray the cleaner? Or does one need to pull the EGR off and spray there? Or both? Any good photos of what the EGR port under the valve looks like? Thanks! JWS '99 Rodeo LSE 4x4
|
|
#3
05-03-2004, 11:49 AM
|
|||
|
|||
Do both, and the clean out the PCV.
__________________
-Ryan Isuzu Moderator Car Show Tips Operations manager with a results-driven passion for process improvement FAQ 98-04 Isuzu Rodeo, Rodeo Sport, Amigo, Trooper SOLD - NOV2015 - 2000 Amigo, V6, HT winter, ST summer, 2wd
|
|
#5
05-03-2004, 03:32 PM
|
|||
|
|||
|
Re: EGR Port pictures, 2nd gen:
Looks like the EGR one, One big hole and one small hole. The small hole leads to the EGR port.
__________________
-Ryan Isuzu Moderator Car Show Tips Operations manager with a results-driven passion for process improvement FAQ 98-04 Isuzu Rodeo, Rodeo Sport, Amigo, Trooper SOLD - NOV2015 - 2000 Amigo, V6, HT winter, ST summer, 2wd
|
|
#7
08-02-2008, 11:22 PM
|
||||
|
||||
|
Re: EGR Port pictures, 2nd gen:
Quote:
__________________
--Dave 1999 Rodeo LS 3.2 4x4 5 Speed 32x11.50-15 BFG T/A KO 3" Lift - Rancho 9000x Rear No-Slip Locker Flowmaster 2.25" 50 Series There is a very fine line between "hobby" and "mental illness." - Dave Barry
|
|
#8
08-06-2008, 09:15 AM
|
|||
|
|||
|
Re: EGR Port pictures, 2nd gen:
This may be my answer!!!! P1406, your days are numbered!!!!
__________________
My car is not "raggedy"....it just needs a lot of "minor" work....
|
|
#9
08-06-2008, 01:48 PM
|
|||
|
|||
|
Re: EGR Port pictures, 2nd gen:
Quote:
__________________
My car is not "raggedy"....it just needs a lot of "minor" work....
|
|
#10
08-08-2008, 04:41 PM
|
|||
|
|||
|
Re: EGR Port pictures, 2nd gen:
OK I have a 97 and im trying to do the same thing. I have used a small straw-like tube to thread what I think is the passage that needs to be cleaned. Check out the picture. Is this the right passage or are there any more that need o be checked and cleaned. I also took a pic of the egr pintle
http://www.flickr.com/photos/26800388@N02/2745145236/
__________________
My car is not "raggedy"....it just needs a lot of "minor" work.... Last edited by bighops2000; 08-08-2008 at 05:29 PM.
|
|
#11
08-08-2008, 06:12 PM
|
|||
|
|||
|
Re: EGR Port pictures, 2nd gen:
If I can attached the pic, this shows the outlet end of my EGR tube before I cleaned it out. It was completely plugged with carbon. Once cleaned, no more knocks.
__________________
2001 Passport, 3.2L V6, 4X4, Auto, 130K mi., mostly stock
|
|
#12
08-08-2008, 09:36 PM
|
|||
|
|||
|
Re: EGR Port pictures, 2nd gen:
Figured what the heck. May as well do it right and took the whole thing off.[IMG]
http://www.flickr.com/photos/26800388@N02/2745725376/ this let me give it a REALLY good cleaning
__________________
My car is not "raggedy"....it just needs a lot of "minor" work....
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
