Help

[Cro]

I got 3 JL Audio W6 10s but currently am only feeding around 300 watts to one of them and I want to know how much better or louder it would sound if I were to hook up the other two with 300 watts to each. Someone hooked me up with those subs for free, in case you're wondering why I got 3.

[Haibane]

It will be louder, but not cleaner

[bmwm3guy]

Wait, do you mean the 300 watts to all three? or hook up two more 300 watt amps and have 300 watts running to each sub?

If you are simply adding on 2 more subs to the one amp, buy yourself some fuses cuz you're gonna need em.

[Haibane]

fuses? What? Fuses won't do anything for him.

[bmwm3guy]

he will fry tons of them if he is running 3 subs off of one 300 watt amp.

[Cro]

I guess i wasn't clear enough. I was thinking about getting a 1000 watt rms amp to power all three. Or since i already got one for one of the subs, i could get a 600 watt or 800 watt rms amp to power the other two.

[PaulD]

get a 1000+ watt amp and go with all three

[bumpinstang77]

Wow nice subs to get for free let me know if you ever want to sell them.

[aznxthuggie]

with 3 jl 10w6 it should it hard, alot of my friends have jl subs, they all hit really good, also if u wire the 3 subs together u might get a 1.5 ohm load or something, so make sure your amp can take it (ppi and jl make amps that are good for that)

[Haibane]

Just a note, if you look at WinISD you will notice with every sub you add you add about .4 more or less depending on the sub to the QTC meaning less quality.

[GSteg]

(3) 10w6 can be wired to 1ohm or 3ohm.

they will get louder before they distort. much louder with 3 than a single 10w6. How do i know? i had 10w6s before

if you are like many who needs to "fully" power their subs, get an amp that does at least 900x1@1ohm RMS. don't go skimpy on the brand either.