wat kind of turbo is there 4 a 240sx

[jimmyhf6]

i dont no much about nissan turbo i was just wondering wats like the best and worst and the ok ones thanks for replys

[terifi]

beats me as far as best to worst, try some searching around and perhaps you can find the specifics you want to compare as far as sizes/psi/etc

some companies make kits like Greddy, Fmax, they usually run around 3-4 grand and if you dont know that much as far as turbos go, this would be a good Noob idea, but if you want the bang for your buck and/or your willing to get your hands dirty (or pay someone else to)...i would go with seperate parts, more customization, better tuning, and better performance

just my 2 cents

[turbo2nr]

well it depends if you want to use the ka24 motor or the sr20det motor b/c the ka can support a bigger turbo b/c it has more liters so it will be able to spool up a bigger turbo at the same rpmz as a sr... for any 4cld motor i wouldnt get a turbo bigger then a .72 a/r even .72 wil be hard to spool if you motor is stock, for stock internals i say get a turbo that has a .65 a/r to .67 a/r that will spool good and give you decent top end. also you might want to look into the flow of the turbos you mihg want one that flows 400lb/min that will make about 400hp for you..
goos luck
1