Factory Alarm Install on a 2001 Prelude SE

[Razaan]

Hi Guys,

I'm looking for a little help here. I bought the factory alarm for the 2001
Prelude SE. I've installed it, but their was one problem. In one of the
steps, they mention about a 2 ping and a 3 pin connector lying loose near the fuse box. I have been able to find the 3 pin connector but not the two pin. The alarm works, but it does not lock or unlock the doors. My original keyless entry remote still works though. I suspect this 2 pin
harness handles the door locks. Does anybody have any ideas where it could be? I have looked everywhere.

Thanks

Razaan

[ponchonutty]

Originally Posted by Razaan

Hi Guys,

I'm looking for a little help here. I bought the factory alarm for the 2001
Prelude SE. I've installed it, but their was one problem. In one of the
steps, they mention about a 2 ping and a 3 pin connector lying loose near the fuse box. I have been able to find the 3 pin connector but not the two pin. The alarm works, but it does not lock or unlock the doors. My original keyless entry remote still works though. I suspect this 2 pin
harness handles the door locks. Does anybody have any ideas where it could be? I have looked everywhere.

Thanks

Razaan

It should be taped up to another wire harness or atleast those that I worked on had.

[Razaan]

yeah, that's what I had thought, but I've looked everywhere and I just don't see it. It's also a very tight spot, so it's hard to get a good view of anything. Like I said, I found the 3 pin with no problems, it's just the two pin connector that I cannot locate.

Thanks

Razaan