engine pull help

[terifi]

didnt see this in the FAQ,

im planning to pull my KA to rebuild it, i was wondering if i have to pull off the tranny 1st or if i can leave it attached (making things SOOO much easier)....if it cant be pulled simply....is there a way to do it by removal the radiator (fans of course) or perhaps the nose....i really dont wanna have to take the tranny off the engine for the pull

also to any of u guys that did it urself.....anybody got an estimate on the time/ difficulty to pull the KA out....(taking the time to make sure it will all go back in later)

-Thanks

[SR20DETpower]

welp people put the whole SR setup in there at once, beeing as how the KA mounts the same, uses same tranny, it probably will go in the same as an SR... hope this helps

[terifi]

im thinkin it will, but just to clarify, ur sayin they take the SR with the tranny, and just....drop the whole thing in...without first dissasembling the tranny from it...............

cause if u can put the whole thing in....then u have to be able to take the whole thing out as well.....

but yea i think i get what ur sayin....that the SR goes in with the tranny on it...no reason the KA wont come out with the tranny on it