Need some help with brand of hood

[Trans_Am_Guy]

What do you guys think is the best brand or material type of Ramair hood I should get for my T/A. Im trying to get a functional ram air going. If anyone has any suggestions I would appreciate it if you could help me out. I have a 99' bright red T/A 6 speed. Oh and also how do you post pix on here. I see it says you cant post attachments but yet, I see many on here.

[towen1]

I would take it you have the non WS-6 car. I have a 2001 Trans Am LS-1. It is not a WS-6 car but I bought a cold air induction from SLP. With the SLP air box lid and K&N filter it gets more and colder air than the stock WS-6 does. SLP also has this combo as a kit at a better price than individual piece price. The WS-6 hoods look good but when you figure hood price plus a good paint matchup you are looking at about $1600. Hood cost about $600 but a good paint match will cost a grand. You can get it painted for $400 but you get what you pay for.

[1991firebird]

http://www.americansportscar.com/products/firebird.htm They have really good stuff there. Check out the customer feedback. Most everyone that buys a hood or body part there really likes it. I think I will buy mine from there when I get the engine put in. Good Luck.

[1991firebird]

http://www.americansportscar.com/products/firebird.htm That should give you a good idea of what to get. Their customer feedback is really good. Check them out. They don't seem that expensive either.

[1991firebird]

sorry about posting them twice...oops.

[Dalusa]

i think the best place i found was http://www.suncoastcreations.com

______________________________________
Best 1/4 mile time 12.68 @ 128mph
386HP 373Torque
Options:Sport Metallic Gold Ws6 Manual
Mods: Hooker competetion headers, Slp y-pipe, Slp LoudMouth Catback, b&m Short Throw, March Pully's, 80mm Throttle Body, Weiand Intake Manifold, Jet stage 2 chip, Slp 160 Thermo, Eibach pro kit, Slotted Rotors (F&B), Granatelli MAF, A-Pillar Guages-(Air/fuel Ratio, Fule Pressure, Trans Temp) Slp Skip Shift, Granatelli - Panhard Rod, G Load brace, subframe Connectiors, Strut Tower Brace, 200 MPH speedo, AFS ZR-1 Wheels (17X9.5-F 17X11-B) Sumitomo HTRZ Tires, Wings West ground Effects (Front only) E-mail or AIM for Dyno/Time Sheet

[1991firebird]

[quote=Dalusa]i think the best place i found was http://www.suncoastcreations.com

you'd rather pay $795 for a hood vs $485? ASCD has much better prices. that doesn't seem to make much sense to me...but whatever floats your boat.