 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Dog Food | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
| Cutlass Series Includes Cutlass Ciera, Cutlass Cruiser, Cutlass Calais, Cutlass Supreme, Custom Cruiser, as well as the GM N-Body subforums. |
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
07-30-2003, 12:50 AM
|
#1 | |
|
AF Newbie
Join Date: Jul 2003
Location: kearney, Nebraska
Posts: 11
Thanks: 0
Thanked 0 Times in 0 Posts
|
88 cutlass ciera starter problem
Hi. new to this forum and I hope someone can give me some good advice. I think I know what is wrong with my car but not sure so I thought I'd ask before I go spend money.
About a year ago, my car wouldn't start, wouldn't turn over, starter wouldn't engage the engine, although it would spin if i remember right. Then all of a sudden after it had sat for a day I tried it and it fired right up. About once a month since then it would do the same thing but always start on the second try. About 3 weeks ago it started doing it and it needed at least 3 tries before it would go. It sounds like the starter is just spinning. Now this last week it sometimes takes 6 or 7 times before it will finally engage the engine. So I'm assuming that the gears on my starter are about all gone. Am I right? Is there anything else it could be? thanks for the help. Car has about 145,000 miles on it. Coincidentally the muffler just fell off and the radio power button now needs to be held in for the radio to work. It seems as if everything is going bad. Second question..should I get rid of it soon?? Thanks again. |
|
|
|
|
08-02-2003, 11:15 AM
|
#2 | |
|
AF Newbie
Join Date: Aug 2003
Posts: 7
Thanks: 0
Thanked 0 Times in 0 Posts
|
I'll check on the starter problem later with my brother - hes a very good auto fella, hes worked on my car alot.
I too have had a Ton of problems with my cutlass recently, 13items have broken in the last 6 months........... I'm not sure if u wanna get rid of it yet....Let me speak to my brother and get back to you |
|
|
|
|
|
08-02-2003, 03:28 PM
|
#3 | |
|
AF Newbie
Thread starter
Join Date: Jul 2003
Location: kearney, Nebraska
Posts: 11
Thanks: 0
Thanked 0 Times in 0 Posts
|
ok, thanks I appreciate it.
|
|
|
|
|
|
08-03-2003, 02:26 PM
|
#4 | |
|
AF Regular
 Join Date: May 2003
Posts: 394
Thanks: 0
Thanked 0 Times in 0 Posts
|
Replace the starter. The bendix is not engaging or rather is not strong to engage on the flywheel to start the engine. It has been getting weaker and weaker and is now giving up. Replace it. All the best.
__________________
NOTHING LIKE AN OLD CAR. |
|
|
|
|
|
11-18-2003, 12:42 PM
|
#5 | |
|
AF Newbie
Thread starter
Join Date: Jul 2003
Location: kearney, Nebraska
Posts: 11
Thanks: 0
Thanked 0 Times in 0 Posts
|
Hi. I still haven't gotten this starter fixed---no money. Anyways, I'm going to do it now and I'm just wondering if its possibly the starter or is it just the starter drive assembly thing. I don't know that much about it. Is it worth it just to replace the starter assembly or should I just go ahead and have the whole starter replaced, since most of the cost of this is going to be labor and not parts. Thanks
|
|
|
|
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
