|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
08-22-2003, 08:12 PM
|
|||
|
|||
|
Fan problem
I have a 1992 SC. My fan won't kick in. I hot wired it and it works. I checked the relay and it's ok. The book indicates it's a bad PCM ... does anyone have any othe ideas or know where I can get a good used PCM?
|
|
#2
08-27-2003, 01:03 AM
|
|||
|
|||
|
first, see if it works when the A/C is on
|
|
#4
09-22-2003, 12:08 AM
|
|||
|
|||
Have you checked the temp. sending unit for the PCM If it hasn't been change it may be cracked and shorted out & not sending any data to the PCM so the PCM thinks it cold. This is only about a 15 buck part and change in 5 mins. without draining no collant. Good Luck.
__________________
|
|
#5
10-09-2003, 12:04 AM
|
|||
|
|||
|
on my 96 i ran a hot wire to a switch and then to the fan w/ a ground goin to the fan ground to.... disconected the factory plug, now i can turn my fan on when ever to keep the motor cooler ....ALSO TURN IT ON WHEN YOUR A/C IS ON
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
