i need help

[bsstud3]

i was wondering how you guys take apart the bodies of the cars you buy at the store. also i need to know how to put them back together.

[knoxciso]

There are a few screws at the bottom. Unscrew them using a philips and carefully take it off little by little by prying off the chassis. Sometimes you have to take rims off or pieces of the suspension as scews are embedded within the rim well or wishobone suspension pieces. To put it back, just reverse what you did.

[jcz1987]

That is the same way I remove the parts from my diecast car. One extra tip: When removing plastic, Take your time and don't pull or push to hard. You might break it.

[simdel1]

and another thing i found is that some of the cars need you to open the doors so that the floor tray (and interior) can drop out.