|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
|
|||
|
|||
|
TPS adjustment settings?
Does anyone know what the TPS settings are and what wires do you use to read them?
OP |
|
#2
|
|||
|
|||
|
what year,motor etc.more info man.And i don't think those TPS are adjustable on bonns;atleast not on my '95.
__________________
1999 GMC 3500 SRW 4x4 7.4 4:10's FF G80 2004 Chevrolet Impala LS 3800 "ALWAYS"...... full synthetic!!!
|
|
#3
|
|||
|
|||
|
Its an '89 Bonneville w/ 3.8.
OP |
|
#4
|
||||
|
||||
|
I'm doing this off the top of my head.
There are 3 wires to the TPS sensor. gray is your 5v reference wire black is the sensor ground blue is the sensor signal wire to the ecm If you back probe the blue wire( with a DVM to ground) with the key on/engine off, you should get a reading between .38 and .42 volts. That is the proper voltage at closed throttle.
__________________
Why do you never have enough time or money to do the job right the first time, but enough time and money to do it again? Got all the certifications 25 years ASE Certified Master Technician GM WCT Yea..I work at a DEALERSHIP....got a problem with that? Want to diagnose cars like the Pros? FOR SALE: OTC Perception 2 channel Labscope (badged as a Matco Reality) This is my personal labscope that I use to diagnose waveforms, like new, comes with leads and training video PM Me for details |
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|