|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| '88 - '91 Civic | CRX | Wagon | Shuttlee Partnership with: LadyNRedSi.com |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
07-10-2003, 04:11 PM
|
||||
|
||||
|
Shift Linkage
Hi,
I am taking out the shift linkage that goes to my tranny. The torque rod is easy enough to disconnect. But the problem is the shift rod, I took the clip out and it says to pull the pin out and the shift rod will ditach. However, I cant get the pin to come out. I tried hooking pliers and vice grips to it and they dint have enough room to grip it and pull it out. Any help would be appreciated.
__________________
1990 Honda Civic LX 5 Speed 1.5 Liter SOHC K&N Cone Filter APC Short Shifter 1988 Honda Civic STD Hatch 
|
|
#2
07-10-2003, 04:13 PM
|
||||
|
||||
|
you need a punch or plunge whatever to get it out. ITs a tool that looks like a need of some sort and u just hammer it out. You can use a small screw driver to punch it out.
|
|
#3
07-10-2003, 05:44 PM
|
||||
|
||||
|
I tried using a punch and hammering it and it still didnt budge.
I even tried doin it from the top and bottom and it doesnt make a difference. Please help.
__________________
1990 Honda Civic LX 5 Speed 1.5 Liter SOHC K&N Cone Filter APC Short Shifter 1988 Honda Civic STD Hatch
|
|
#4
07-10-2003, 07:26 PM
|
||||
|
||||
|
Anybody know of any other way to get this bitch pin out of the shift rod?
As I have wrote I have tried using a punch and punding it from top and bottom. It wont budge loose.
__________________
1990 Honda Civic LX 5 Speed 1.5 Liter SOHC K&N Cone Filter APC Short Shifter 1988 Honda Civic STD Hatch
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
