They are late, but my pics are finally here

[diegoaccord]

Yes, about 80 pics taken today. Dont write comments until i get all the pics up(I'll say when). I would love some feedback, since I went though a lotta BS just to get these here. And all my cars have Japanese license tags, or European ones. No 2 cars have the same tags, except the dealers. Tell me if you want some. And the ones with a stripe are dealer tags. I will only do 1/24 tags. If you know a site that would like these pics, or you have one, tell me if you want one of my modded cars on there. Enjoy. Thanks. If all dont show up, just right click>show picture.

My Hotwheels 1/18th Civic TunerZ- It was gold now its white, and de-riced. You'll like it. If you have one, or seen it, you know just how ricey it is. You also see that nothing remains stock
This is it after mild modding

THE TRANSFORMATION
The Civic while in the "paint shop"

The interior was rice, but I gave it S2000 seats, and wheel, and replaced the orange theme with red/black/gold

quarter view showing de-riced lights

looking good

This is the custom divorced wastegate

This is a clearer view of the rear

The motor has been detailed


My 1/18th HW Ferrari Barchetta
New wheels, body color front lip, and interior trim red, as well as the "CF" hood. Yes, the rear meats are fatter than the front.
Side

wheel detail

Sweet

Interior trim

Black hood

[diegoaccord]

My 1/16th Honda NSX R/C

It was an "Acura" but now it wears its real Make.
New badge

Quarter


My 1/36 Metal Maxx
Integra DE-RICED, wheels painted

Civic DE-Riced, wheels also painted


My 1/18 Maisto Honda S2000
Clear corners, Ferrari wheels, Custom interior, painted, the works,
I like it, you wont see another like it

Wide rear meats

lookin at you

HW Civic wheel and seats


Some of my 1/64 cars, about half. I have all makes and models
Toyota section

Ferrari's, Jetta, Lotus's Lambos, Focus's, ect

Tried to get all of em, but this camera has an off-nes to its aim. The other stuff is Ripped Fuel, and about 30 of my Ranma1/2 anime tapes

closer, but no cigar


Now Its time for the 1/24 section.

[diegoaccord]

I gave these to my buddy, I got them back so I could mod them. I'll be giving them back when I return his camera. I think he'll like em.

911 lowered, black inner housings, red wheels, interior detailes

Corvette, RSX wheels-black, hood, interior

S2000 wheels, headlight housings done, ect.


Now its time for the best shit!!!!!

[diegoaccord]

Lined up shots of my 1/24's















My Miasto 1/24th DC5's

One is (near)stock, one is done up to look like the DC5 Type R's, the Type R was exactly the same as the blue one when I got it.

Showing Honda banner and lowering

Nice side shot

Show the JDM lights, and no fogs

Side of Integra Type R DC5

Side of RSX Type S DC5

comparing wheels and ride height


My Miasto WRX GDB

I just gave the seats red inserts, and painted the window surrounds
I love that blue
Camera seems to have distorted the shape....

Side


The Fast and the Furious-----------------Models came with characters.
The hijacking Civic that getting shot in the manifold/tires doesnt affect.
Painted calipers and Valve Cover red. got rid of ricey spoiler.

And Harry-I need NOS, need 2 of em', the BIG ONES! Tonight!


"Hey! Next time, try FatBurger. You can get yourself a cheeseburger and fries for $2.95, faggot!!!" I like the tuna here." "Bullshit, asshole, nobody likes the tuna here!"******Watch yo self*****


My Motor Max Skyline R34's
These look 1000X's better when you detail the headlights
The silver one. Has gold wheels

The black one, They dont come in black, and this one is lowered, and has interior modifiactions, Side shot

Same one

Blue one

Lowered VS Stock, BIG difference.


My MotorMax Green RX7
Has roll cage, sponsor stickers, R34 wheels, paint other stuff.


My MotorMax Honda S2000
Has blaked out lights, and WIDE Miasto Dodge Viper wheels
Looks better than stock

Big meats


Civic and DC2 Integra's follow

[diegoaccord]

Time for the Civic's and Teg's. I know DJ Noodle will like em.

A nice EK hatch, got it from Orlando last month . Best. Place. EVER.
I did the wheels. Its actually 1/28.


MotorMax DC2 Type R White- wheels white, interior detailed, has Euro plates, and Euro spec turn lenses.
Simple




The Yellow modded one, now has Viper steering wheel, as youll see. Has tach from 1/18th HW Civic and part of roll cage(both fit this scale better). This is a full race car, no passenger and gutted.

You can easily see the cage, tach on dash, and the steering wheel in these shots. I hope you can appreciate this work.






The outside of it.
Nice view, look at that muffler

The mirror-like Acura sign across the hood/fenders.

Nice mods

You lookin' at me!?!?!?




Comparisons of the White Teg(very lightly modded) and the yellow Teg(highly modded)
Japan tags, German tags,

Lowering, it does wonders for looks, eh.


My red MM Civic Si, near stock, detailed fog light surrounds
Side, inside

Side, outside

The H has been removed, and the fogs detailed


Comparisons of the Red and Yellow Si's.
My custom Type R lights VS stock


The yellow Si. It was blue when I got it.
Front, the bottom says HONDA

another, different setting.

The interior, red accents

The engine bay/front

Side

Side 2

Its time to say "GOODBYE"


The end

[Feint Motion]

you have , 1500 models. lol just to think with all that money, you could have a real car. nice cars

[Midnight Racer]

Originally posted by MugenCRXSi
you have , 1500 models. lol just to think with all that money, you could have a real car. nice cars

Nice models

[diegoaccord]

Dude, I got a fucking blue Si repo'd Saturday, lighten up. Thats why I listed "Soon to get Civic" under car.

[Modgod]

Nice modifeirs RX7 I wish they made one!

[dj_noodle_jd]

hey, those are very nice models!!
u got very detailed mods, wish i cud do the exact same haha..i like ur japanese license plates, cool addition to the car, gives it a nice look!..
you have so many models! makes me jealous. All of your cars look awsome, keep up the great work!..

-djnoodle

[diegoaccord]

Glad to hear from ya DJ. Since I know you like the MM Civ/Tegs, I decided to give those a larger section, so you could see exactly what I did to them. I bet you didnt know the Integra and Civic went that far on mods, heh? You want some of the Japanese plates? You or anybody say the word and you got some. So, noone else has anything to say? Any likes, or dislikes, how did I do something?

[dj_noodle_jd]

yeah, i'd like to know how u lowered ur rsx!..does it still roll??..i just got one in black..the engine bay is pretty detailed for a 1:24 scale..also, i'd like to know how you made those japanese license plates..did u just print it out, etc?..those look very good!.. oh and btw, when u lowered the rsx, did you do any cutting? gluing?...i want to lower it, it's so high right now..and i want to do a clean job of lowering it ..

oh ya, how'd u make the roll cage for ur yellow integra?..looks nice ..

i also have a 1:18 scale s2000 like yours too, haha..mine's yellow tho, im thinking of just keeping it the way it is for now..but anyways, i like ur 1:18 Civic, very clean job!..to bad there wasnt a way of having a stock bumper in the front tho, but besides that, that model is awsome..very detailed! i dont even think i cud do such good work on an 1:18..i think they're to big for me to work on for now heh..just 1:24 scales at the moment..havent done much to them tho..just repainted the gunmetal integra, needed another coat..

<--your models

[diegoaccord]

The tags. It was a little more involved than that for me, but thats all YOU will have to do. Tape both sides before cutting them, that will "laminate" the tag. The Integra's bars are from the 1/18 Civic, cut down a little bit. It fit perfectly, the bars across the top of the windsheild meet behind the mirror. The bends already matched the shape, so that was coincidence. The rest of those bars are in the RX-7.
Yes, the RSX is easier to lower than any MM. With the front, just cut off any material in front of the pedals. The rears, you need locktite. Snap the white plates off the top of the axles, and you will have height adjustment. This does cause alot of camber, so you might not want to slam it like my Integ-R. Find the position you want, then lock it with the glue. You can do that to the front, at the expense of turning. The wheels will still roll. Here are the tags I made. They were sized right for 1/24 when I made em, so they should be good.

The tags are Tax Free tags, indicated by the roman letters. Dont worry about those 2 older tags.

[ac2539]

haha, i like the f&f quotes you put in there. that was funny. "What did you put in that sandwich?"

[Ran]

wow dude, those look awesom!