|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| '88 - '91 Civic | CRX | Wagon | Shuttlee Partnership with: LadyNRedSi.com |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
04-09-2003, 09:54 PM
|
||||
|
||||
|
DX manifold on ZC?
Heres what happened... A while ago I got a Neuspeed N2 header for a "88-91 Honda Civic/CRX" on EBAY that I was going to put in when I put in my ZC. Well, I went to go test fit it and it seems they sent me the wrong one. I think its for a prelude or something cuz the ports are spaced pretty far apart (not even close to what they should be). Anyways, Im wondering if the stock manifold from my DX or even the stock header that came with the ZC will bolt up with my exhaust and work untill I can get the proper header. Anybody know?
|
|
#2
04-09-2003, 10:06 PM
|
|||
|
|||
|
the zc header will not work, it is a 4-2 and the stock is a 4-2-1. but you can modify your stock one to fit on the zc, its pretty simple.
|
|
#3
04-09-2003, 10:10 PM
|
||||
|
||||
|
I got both the top and bottom half of the stock ZC header if that makes any difference. Will it bolt up directly to my exhaust or will it not work no matter what?
|
|
#4
04-10-2003, 12:40 AM
|
|||
|
|||
|
if you got both halves no point in not trying... and the dx one will work... but it should be port matched... the zc has slightly bigger ports
__________________
90- crx si w/ a D16a Vtec and a few goodies, oh and 60k miles on it heh
|
| |||||||||||||||||||||||||||||||||
|
POST REPLY TO THIS THREAD |
 |
|
|
