|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
03-06-2002, 10:53 AM
|
||||
|
||||
|
Installing Ingalls front camber kit
I just ordered the Ingalls front camber kit and was wondering how hard this is to install. I've done the washer trick for the rear camber. Any of you who have ordered this kit and installed it yourself, I'm interested in hearing your suggestions!
__________________
Mods: AEM intake, DC Sports 4-1 header, Tanabe exhaust w/ 2.5" custom piping, ITR exhaust cam, APEXi VAFC, AEM FPR, Warlboro 255l fp, RC 440 injectors, ACT stage 3 clutch, JR Supercharger, Weapon R coilovers, VIS CF vader hood, CF Angel Eye Projector headlights, Black housing corners w/ amber bulbs, "Hybrid" rear emblem, custom rear speaker panels. 
|
|
#2
03-06-2002, 01:46 PM
|
|||
|
|||
Fairly easy. It took me about an hour for both sides. The only trick is getting the old mounts off. They are attached by a plate, so you either have to disconnect the upper strut mount or cut the mounting plate between the mounts (which I did). Ingalls recommends ditching the plate anyway.
|
| ||||||||||||||||||||||||||||||||||||||
 |
POST REPLY TO THIS THREAD |
 |
|
|
