Spinner caps for Bullit Wheels

[coloradotaco]

I may be showing my age but I liked the way knock offs looked on the Hallibrand wheels on a AC Cobra or the spinners on the old Cragar SS wheels.
Ever seen spinners that would fit the center caps on 17" Bullit Wheels?

[GTStang]

Nopo

[StangNut86]

spinners + mustang = you suck. imho.

[coloradotaco]

tell me that the Hallibrand wheels on Cobra and Shelbys didn't look good with spinners (knock offs). Not those spinners that they put on ghetto pigs

[StangNut86]

now i'm curious. do you have pics?

[coloradotaco]

http://www.xs4all.nl/~luukb/cobra01.jpg
http://www.xs4all.nl/~luukb/i000059b.jpg

[StangNut86]

oh i get it.... when i think spinners i think secondary wheels that spin independantly of the wheel itself. those are just hub covers. and personally, i think they only look good on classic cars. once you get into boxes on wheels (read: 80s cars) then they're pretty much out.

i have a thing for powdercoated wheels. i might get that done to a set of draglites when i get my motor transplant done.

[coloradotaco]

Just saw "Gone in 60 Seconds" on the tube the other night. A bad movie with great cars. His "Unicorn": Eleanor was a sweet looking '67 Shelby GT 500 with knock off wheels. I too, have a thing for classic looking Mustangs.
I put the 17" Antracite Bullitt wheels on my '95 GT DF green ragtop. I lowered it 1 3/4" with Eibach springs, so the wheels fill the wheel wells quite nicely. I think some polished three point spinners might look good on it.

[Canoman]

Take a look at this:

http://www.mach1review.com/M1RHalibrandWheels-1A.html

You can buy new Halibrands... Dunno if you can get spinners to add onto Bullitt rims.

[coloradotaco]

nice. Now if I could find a way to adapt those spinners to my Bulitt wheels

[b3warnick]

Hey colorado --- check this out

http://www.halibrand.com/index_frames.htm

They sell the knock off's separately it appears. At the bottom of the page is a link to contact Halibrand. They should be able to figure out if any of their 'spinners' will fit your rims.

Good luck

P.S. Let us know how things turn out.

[coloradotaco]

exactly what I am looking for but the dealer page is under construction.

[duplox]

Pull out the center cap on your wheel and measure the hole. Mustangs Unlimited sells center caps that look like the knock offs. If they're 2" - 2.125", they'll fit.

Thats what they look like...
http://www.mustangsunlimited.com/
search for "center spinner"

[duplox]

search for "center spinner"
spinner has to be singular, or it wont work.
Here is the name of the product on their site:
Wheel Center,Magnum 500 W/3 Bar Spinner
search using any of those words.
Or better yet, search using the part #:
1130MS
Any of those will get it for you.
By the way, DONT click on 74-04 mustangs. Just click the 'enter' sign, type in 1130MS in the search field, and search.

[coloradotaco]

Originally Posted by duplox

Pull out the center cap on your wheel and measure the hole. Mustangs Unlimited sells center caps that look like the knock offs. If they're 2" - 2.125", they'll fit.

Thats what they look like...
http://www.mustangsunlimited.com/
search for "center spinner"

I am going to hold out for the Hallibrands, if I can find a dealer. I like the polished look over the chrome.
Thanks for the help