98 Blazer replace starter

[emingin]

I need to replace the starter in my 1998 Blazer, 4wd, 4 door, LS. I've read online everything from it taking 1/2 hour, to all day. Some say the motormount has to be removed and the engine jacked up to get it out, others say that's not the case and that it's a breeze.

Who's right? How hard is it?

Thanks

[gmtech1]

I have'nt done one in a while, but I remember them being a pretty simple repair. Don't forget to disconnect the battery!

[viggy58]

very easy job in my 2wd. dunno if the 4wd is much different though...

[old_master]

Chilton flat rate for 4WD starter replacement is .6 hours and add .3 if it has a skid plate, (under an hour either way).

[jacko165]

jack up passenger front wheel take it off,there is a inspection flap on the wheel arch take it off the starter is just below

[rhandwor]

Originally Posted by old_master

Chilton flat rate for 4WD starter replacement is .6 hours and add .3 if it has a skid plate, (under an hour either way).

Without a lift and proper tools it will be at least double.