|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Dog Food | IgorSushko.com | Corporate |
|
| Latest | 0 Rplys |
|
|||||||
![]() |
Show Printable Version | Email this Page |
Subscribe to this Thread
|
|
|
Thread Tools |
|
|
#1 | |
|
AF Newbie
Join Date: Feb 2012
Location: Placentia, California
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
2005 SER SES Light Still on after Pre-Cat replacement
2005 Altima SER with 98K. Dealer told me my rear pre-cat was plugged and was causing the rattle in engine and SES light in my car. Replaced it (old pre-cat was very bad) but SES light still keeps coming on. Rattle is now gone. There are about 5-O2 Sensors in this car. The EGR Valve is, of course, integrated and intricate. Anyone have this similar issue? What can I check first to start eliminating?
Thanks |
|
|
|
|
|
|
#2 | |
|
AF Newbie
Join Date: May 2012
Location: Marana, Arizona
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 2005 SER SES Light Still on after Pre-Cat replacement
Any idea what code is stored for the C.E. light? Is the rattle from the engine and does it change with RPM?
|
|
|
|
|
|
|
#3 | |
|
AF Enthusiast
Join Date: Mar 2008
Location: garner, North Carolina
Posts: 3,579
Thanks: 86
Thanked 100 Times in 100 Posts
|
Re: 2005 SER SES Light Still on after Pre-Cat replacement
Was the CEL reset & cleared after the new cat?
No - If the problem is resolved, it will clear it self after the drive cycle. Yes - You got other problems, we need DTC's to analyze problem. Almost any Auto store will pull codes for free, but don't buy any parts yet. Write down any other symptoms: Fuel economy performance issues |
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|