need help

[roccitte]

Have a 93 1500 4x4 with 4l60e 180000 miles on it when I bought it put another 20000 on it tranny always shifted hard I worked it like a dog so when it started slipping I wasn't surprised and when D and OD went I figured it was time for a rebuild so I pulled it and replaced it put ( new ) one in today still no D or OD shifts fine through to 2nd then its like its in neu any help would help

[MT-2500]

Originally Posted by roccitte

Have a 93 1500 4x4 with 4l60e 180000 miles on it when I bought it put another 20000 on it tranny always shifted hard I worked it like a dog so when it started slipping I wasn't surprised and when D and OD went I figured it was time for a rebuild so I pulled it and replaced it put ( new ) one in today still no D or OD shifts fine through to 2nd then its like its in neu any help would help

Get it on a good traNSMISSION CApable scaNNER AND CHECK IT OUT AND CHECK FOR CODES.
pOST BACK ANY CODES.

[j cAT]

Originally Posted by roccitte

Have a 93 1500 4x4 with 4l60e 180000 miles on it when I bought it put another 20000 on it tranny always shifted hard I worked it like a dog so when it started slipping I wasn't surprised and when D and OD went I figured it was time for a rebuild so I pulled it and replaced it put ( new ) one in today still no D or OD shifts fine through to 2nd then its like its in neu any help would help

you know what happens with these transmissions when they fail.

question is what does NEW MEAN ? new to vehicle / rebuilt new / never used before new / scrap yard new / swap new etc.

hard shifts mean this was slipping for an extended amount of time . when installing another transmission the lines/radiator tranny fluid cooling need be flushed.

[roccitte]

The ( new ) ment I didn't rebuild it so taking there word they are a well know shop with good rep I cleaned the lines before I installed it it is just that it didn't have D or OD and that is why I replaced old one was worried might be something else and I might have bought tranny prematurely

[j cAT]

Originally Posted by roccitte

The ( new ) ment I didn't rebuild it so taking there word they are a well know shop with good rep I cleaned the lines before I installed it it is just that it didn't have D or OD and that is why I replaced old one was worried might be something else and I might have bought tranny prematurely

you purchased a new transmission, from a transmission repair shop. they said it is new , never used . this is what I am getting. does it look new ? the metal bright and shinny with no corrosion on the skin. also this came with a new unused torque converter correct ?

how much did this new tranny cost ?

I would return it fast .

[MT-2500]

Originally Posted by roccitte

The ( new ) ment I didn't rebuild it so taking there word they are a well know shop with good rep I cleaned the lines before I installed it it is just that it didn't have D or OD and that is why I replaced old one was worried might be something else and I might have bought tranny prematurely

A person can not buy a brand new automatic transmission or a brand new converter even from the dealer.

Only rebuilt automatic transmissions can be purchased.