|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
07-14-2003, 01:54 AM
|
|||
|
|||
P0327 and P0440 Troubles
well, after a thousand problems with my car, and the dealer botching a manifold gasket job, causing them to pick up the cost on a new engine, only for that one to fail, and them replacing it Again...my service engine soon light is coming on. ran it to autozone this sunday afternoon and the little computer thing-a-ma-jig came up with the P0327 and P0440 codes. I've researched a little bit on these forums...which has been a ton of help, i'm glad i found it...and i found the previous thread on the Knock Sensor....so i guess i should replace that. Anyone have any ideas on the 440? It codes for Evaporative Emission Control System Malfunction...what the heck? Any help would be greatly appreciated...i live in a small town and am tired of dealing with the "dealer"
thanks a million Ryan Chambers oh yeah, on the same idea as the thread on the AC blowing from the floor and defrost only...mine just started doing that today as well. so if anyone has any ideas on that....i would be quite excited!!! 
|
|
#2
02-04-2007, 08:07 PM
|
|||
|
|||
|
Re: P0327 and P0440 Troubles
Just want to comment that I also have a P0327 indication right after the intake manifold gasket was changed. Don't know if there's a connection.
Quote:
|
|
#3
02-05-2007, 12:44 AM
|
||||
|
||||
|
Re: P0327 and P0440 Troubles
welcome to af.
this thread is 3 1/2 years old. you can start a new thread with a link to this one if need be.
__________________
2000 Chevy Blazer ZR2 Performance Mods: Numerous Suspension Mods: Some, but not enough Exterior Mods: Just Right 1987 Buick Turbo T Dark Red Low 11 sec sleeper  .030 4.1 block, PT6262E, & other odds and ends.... My Cardomain |
| ||||||||||||||||||||||||||||||||||||||
 |
POST REPLY TO THIS THREAD |
 |
|
|
