HELP my rear disc swap has gone so bad

[jusg19]

ok, i finally got it back together. crx si rear on a civic hatch dx. but i went to get an alignment and the front was good, the drivers back was fine, but the passenger rear had a toe of -2.56 degrees and they fixed it to -1.93 degrees. the spec is +.04-+.16 degrees. the only thing i did different on the right than left, was the front arm on the trailing arm that connects to the car and controls the toe adjustment, on the left i used the crx one and on the right my stock hatch one because i didn't have the crx one for that side. (if anyone has one can you post quickly please.)

I called a place that does disc swaps on hondas and they said i should just put back my upper and lower arms from the hatch and take off the crx ones off. so i'm trying to decide weather to put those 2 arms on, which i have. or go hunt for a crx front arm.

AVOID DOING A SWAP BY AN SI!!!!! (never thought i'd say that)

[gunnmen01]

maybe your problem is a bent trailing arm....



gunnmen01

[jusg19]

the arm isn't bent, i thought that too but its not. i compared it with the one i took off and it has all the same shapes.