 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
06-22-2008, 04:34 PM
|
#1 | |
|
AF Newbie
Join Date: Jun 2008
Location: Beavercreek, Oregon
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
'91 4Runner, pops out of first gear.
Hey Guys,
Sounds like a bunch good advice can be had here!.... Anyway I have a 91 4Runner 3.0, Manual 5 spd 4WD. First gear wont stay engaged....just pops out and makes a heck of a bang....I can hold it in gear on a flat with major pressure on the stick but it isn't easy. All other gears work just fine. Hope one of you fine folks can point me in the right direction? Thanks |
|
|
|
|
06-22-2008, 07:04 PM
|
#2 | |
|
AF Regular
Join Date: Jul 2005
Location: Dartmouth,Nova Scotia
Posts: 126
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: '91 4Runner, pops out of first gear.
Shift lever pilot bushing # 33548-31010 (green)
Shift lever seat # 33505-35020 or 33505-35030 (white) Note: the 2 above #’s fit all trannies:G,R,W series (22R,R-E,3VZE)84-95.5,no need for entire shift lever retainer (85-95.5 pre-Tacoma) http://sww.4runners.org/writeups/shift/index.html http://www.off-road.com/toyota/tech/shifter/index.html http://www.brian894x4.com/Shifter.html http://toyota.off-road.com/toyota/ar....jsp?id=186539 http://www.marlincrawler.com/docs/sh...eat/index.html http://www.marlincrawler.com/htm/tra...rans_parts.htm http://www.marlincrawler.com/images/shiftseat_500.jpg http://www.marlincrawler.com/images/brokenseat_500.jpg Sidney® ™ Repairs TV's,VCR's,home/car audio out of my apartment E-mail:sidneybek(at)yahoo.com Dartmouth,Nova Scotia Canada 1995 Toyota 4-Runner,22R-E,G52 with 227 000 KM |
|
|
|
|
|
06-23-2008, 03:02 PM
|
#3 | |
|
AF -Advisor
Join Date: May 2005
Location: the Socialist State of, Maryland
Posts: 1,005
Thanks: 3
Thanked 20 Times in 19 Posts
|
Re: '91 4Runner, pops out of first gear.
Your problem may be the bushing and seat, but it could also be a tranny problem. Start with the basics and get the parts from Marlin, they are far superior to the Toyota parts.
__________________
84 4Runner - ARBed 5.29s F&R, 4.7 & 2.28 t-cases, Chevys, AP x-over, BudBuilt x-member, 2" drv trn lift, 36" TSLs, 30 spline Longs 80 something p/u - Buick 231 V6/TH-350 trans, Holley 4 bbl, Weiand intake, dual batts, dual tanks ... 89 4Runner - stock 2000 Isuzu Trooper + 2010 Sonata |
|
|
|
|
|
07-05-2008, 06:24 AM
|
#4 | |
|
AF Newbie
Join Date: Feb 2008
Location: Mobile, Alabama
Posts: 15
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: '91 4Runner, pops out of first gear.
yep. try the bushing first.
i came here with the exact same problem (also, can't engage first unless at an almost complete stop) and had that solution presented to me. while it did improve the overall feel of the shift lever, it wasn't what i needed. but it's sound advice,and many others with this symptom have been fixed. if you still have issues, come back for more fault isolation. |
|
|
|
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
