Why dont we start an official 1/4 mile time list?

[88CRX]

Why dont we start an official 1/4 mile time list?

List times, mods, conditions, etc.

[IntrepidLHSGC]

1994 Chrysler LHS 3.5L V-6, 15.6 quarter mile, no mods, clear midday conditions 78 degrees

[91zc]

1991 civic 4dr 14.8@94, b16a, Stage 1 clutch, CAI, thermal exhaust, lowered on coilovers, conditions were about 65, little humidity, and sunny.

[88hondaowner]

16.1 et
88 civic dx hatch
Pacesetter Header, Custom CAI, Homemade exhaust..and bosch +4 plugs
Conditions: 55-60degrees clear, sunny

[Melt]

I need to go out and run, I am assuming I would run somewhere in the 16's

1991 Civic LX Sedan
SOHC ZC engine still running DPFI
eBay Generic Short Ram Intake
High Flow Cat
Custom muffler
Bosch Platinum Plug wires thats like 20hp
New clutch (still stock)

[RedRacerCivic]

17.4 on my DX motor that i used to drive while i got my d16a6 built.

16.00 on the Si d16a6 motor before i pulled it.

[slammed89civic]

89 sx hatch

d16a6 ported polished head, 65mm throttlebody, knife edged crank, aftermarket pistons and rods (forget what brand, came with the engine) and intake/header/exhaust

gutted interior (everything exept drivers seat, steering column, and a tach)



14.97


73 degrees sunny, low humidity


that was my best pass ever with that car, soon to drop either my junkyard turboed d16z6 or my new b18 in my new 91 std hatch

[slammed89civic]

wow, i just realized that if me and 91zc where to race i would be right on his ass with an a6 and he has a b16....








that my friends is proof that b-series engins are not there all cracked up to be

[mellowboy]

Originally posted by slammed89civic
wow, i just realized that if me and 91zc where to race i would be right on his ass with an a6 and he has a b16....








that my friends is proof that b-series engins are not there all cracked up to be

Yeh well look how much stuff u've done to the sohc while 91zc is just stock.

[slammed89civic]

true BUT.....there is only about 500.00 into that engine, and im sure he has approx. 1300 into his

[slammed89civic]

by the way, im not trying to flame anyone at any extent! i cannot wait till kris gets his a6 done, its gonna rawk

[tbk49]

i ran 17.4 last year bone stock,

[civickiller]

16.7 intake, straight pipe, open exhaust, stripped interior, coilovers, short shifter
hot and sunny day in good ol hawaii. probably about 85 degrees

[RedRacerCivic]

Originally posted by slammed89civic
89 sx hatch

d16a6 ported polished head, 65mm throttlebody, knife edged crank, aftermarket pistons and rods (forget what brand, came with the engine) and intake/header/exhaust

gutted interior (everything exept drivers seat, steering column, and a tach)



14.97


73 degrees sunny, low humidity


that was my best pass ever with that car, soon to drop either my junkyard turboed d16z6 or my new b18 in my new 91 std hatch

Thats a badass time on a SOHC, i almost have the same set up as you, but i am still breaking in the motor....so i dont know how fast it is...can you tell me if you still have the stock 75mm bore on your a6 since you have aftermarket pistons?? I hope that my a6 will be in the 14s since i did so much stuff to it.

[91zc]

Originally posted by slammed89civic
wow, i just realized that if me and 91zc where to race i would be right on his ass with an a6 and he has a b16....

that my friends is proof that b-series engins are not there all cracked up to be

Yeah, but you are gutted while I have a full interior... hehe No but you do have a badass time for a sohc. I'll give you credit for that.