|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
03-02-2004, 01:34 PM
|
|||
|
|||
|
HELP! Question with 2.8L V6 Camaro: engine/tranny
Who knows if my tranny on my 88, 2.8L V6, 5-speed manual will bolt up to a 350? If possible, whos got a cheap 350?
If not, whos got a cheap 350 and/or tranny? ....willing to sell engine/tranny (or trade).... nothing wrong with them, just not big enough for me [email protected] 
|
|
#2
03-02-2004, 06:03 PM
|
||||
|
||||
|
Re: HELP! Question with 2.8L V6 Camaro: engine/tranny
The T-5 tranny on your camaro will bolt up to a 350, provided you get a bellhousing from a 350 as well.. The only problem is that your tranny wont last long behind a 350, the biggest engine they used the t5 on was the 305 because it wasnt strong enough for the 350.. If you want a good transmission to put the added power to the ground.. I recommend getting a T56 out of the newer camaro's, or if you want to go to auto, the th-700R4 is a good transmission...
|
|
#3
07-19-2004, 04:13 AM
|
||||
|
||||
|
Re: HELP! Question with 2.8L V6 Camaro: engine/tranny
The transmission with your v6 (if standard) will be to small to mount up to a 350. Even a 350 bellhousing will not fit onto a v6 tranny. Therefore, a tranny is what you will need if your doin an engine swap.
BTW what type of rear end r u running? Hopefully something big enough 10bolt that will support a 350 
|
| ||||||||||||||||||||||||||||||||||||||
|
POST REPLY TO THIS THREAD |
 |
|
|
