 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Dog Food | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
11-18-2003, 07:34 AM
|
#1 | |
|
AF Newbie
Join Date: Nov 2003
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
|
Axle won't come out, '97 Camry
I'm having a lot of trouble getting the right axle out of a 97 Camry. The lock ring is off the bearing and the Haynes manual says it should just slide out but I've applied a great deal of force and it hasn't budged. Any ideas? Thanks for your help.
|
|
|
|
|
11-25-2003, 11:32 AM
|
#2 | |
|
AF Newbie
Join Date: Nov 2003
Location: Anywhere
Posts: 8
Thanks: 0
Thanked 0 Times in 0 Posts
|
I use a 3/4" solid brass round bar, PB blaster, and a 3 lb hammer to pound them out. Hit it right on the bearing, and it takes a while. I have seen where that manual says "slides right out", yeah right.
You said lock ring, I hope you also meant lock bolt on the bearing carrier is loose as well. |
|
|
|
|
|
11-25-2003, 12:26 PM
|
#3 | |
|
AF Newbie
Thread starter
Join Date: Nov 2003
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
|
Thanks NDenso.
Yes, I do have the carrier lock bolt removed. I'll give your method a try next time I have time to work on it. |
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||
|
POST REPLY TO THIS THREAD |
 |
|
|
