Firewall in a P11?

[Koojo]

Im trying to run some wires through the firewall, and I am looking for a hole somewhere in it (preferably on the drivers side, but if there is one on either side, let me know). So if anyone knows...please help!!!!! lol thanks

[frogg]

Look to the left of the brake pedal and there should be a little "cutout" for a hole. You will have to take out the cutout and drill a hole from there.

[AznVirus]

ya easiest way is to find the cutout and use a coat hanger, it should end up in the engine bay somehow. or you could go the easy way and drill, but make sure 100% that theres nothing on the other side.

[frogg]

On my car, there was the cutout in the cloth, but no actual hole in the firewall. I had to drill, but comes out right at the top of the engine bay..

[G-Forces]

That's probably where the clutch should go.

[Koojo]

im just running some wires into the car so i can put a switch for these lights that im putting in. I need one small hole in the firewall, and I dont want to drill anything. someone said its to the left of the brake pedal? I have an auto). Also, i have to remove the carpet where the pedals are to find the hole right?

[frogg]

Yes, to the left of the brake pedal. I also have an auto.
Ok, look for the cloth that is a dark brown color and is "insulated" kinda.
You will find a little "cutout" in the cloth. You will have to take off the cutout and drill a hole. Believe me, there is no other hole that is already there. I spent 2 weeks looking.

[Koojo]

so after drilling the hole and running wires through it, do i need to stick anything in the hole so that water or other stuff doesnt get inside the car? i know the hole is pretty small but still you know

[frogg]

I believe you can put silicone on it to seal it up, though what I did was make a hole just big enough and used rubber grommets.